USRP B210 CW trasmition and reception

10 visualizaciones (últimos 30 días)
Titu Samson
Titu Samson el 12 de Jul. de 2019
Comentada: Julien el 15 de Mzo. de 2021
I have a b210 USRP which has got 2 Tx channel and 2 Rx channel, I need help in CW trasmitting through 1 channel and Rx through 2 channels all at the sametime.

Respuestas (1)

Kaashyap Pappu
Kaashyap Pappu el 25 de Jul. de 2019
Editada: Kaashyap Pappu el 26 de Jul. de 2019
The USRP B210 has 2 RF channels. When a single channel is transmitting, the receiver of the same channel is inactive. In other words, the B210 is capable of half-duplex communication on each channel. This limitation is due to the USB 3.0 interface, which uses the same data path for transmission and reception.
Assuming you have a single USRP board, a workaround would be to have 2 instances of MATLAB open. Use one instance to program channel 1 for transmission and reception for half-duplex communication, and the second instance to program the second channel as the receiver.
  1 comentario
Julien
Julien el 15 de Mzo. de 2021
Using 2 instances of Matlab on the same computer with a single B210 does seem to work, even with the TX on one channel and the RX on the other. The radio appears to be busy on whichever channel has been started the second one. I am also interested in doing full-duplex communication on a single B210, but does not seem possible to do so with Matlab...

Iniciar sesión para comentar.

Categorías

Más información sobre Communications Toolbox en Help Center y File Exchange.

Etiquetas

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by