Computed parameter in Simbiology

I need a computed parameter in Simbiology model. So I defined a parameter param1=param2/param3 using the rule (repeated assignment). I defined param2=10 and param3 as 5. When I accessed the parameter value using sbioselect(m1, 'Type','Parameters') I get param1=1. How to know the what value of param1 is going into simulations. Is there any other way to define the computed parameter in Simbiology ? How to know what value is being usedin the simulation for computed parameters.

Answer 1

[Florian Augustin]

Hi Rajeev,

You could call the function getequations on your model, getequations(m1). This gives you a printout of the values. If you simulate the model, then you could also log param1 to see its value changing over time; this may be of interest, if param2 and param3 are not constant. If param2 and param3 are just constants, then you could also use an initial assignment rule.

-Florian

https://www.mathworks.com/help/simbio/ref/addrule.html

https://www.mathworks.com/help/simbio/ref/model.getequations.html