using Gauss-Seidel Method to solve this problem

Figure below shows the one-line diagram of a simple three-bus power system with

generation at bus 1. The magnitude of voltage at bus 1 is adjusted to 1.05 per unit.

The scheduled loads at buses 2 and 3 are as marked on the diagram. Line impedances

are marked in per unit on a 100 MVA base and the line charging susceptances are

neglected.

◼ Solve the power flow of the above figure using Gauss-Seidel Method in Matlab by

developing M-file code.

◼ Analyse the power flow if there is a wind farm con taining eight Siemens SG 2.1-114 wind

turbines connected at bus 2 to supply renewable energy to the system. It is assumed that

the average wind speed is 12m/s at hub height for the site. The technical specifications of

the Siemens SG 2.1-114 model is in the picture.

[Walter Roberson]

http://www.mathworks.com/matlabcentral/answers/6200-tutorial-how-to-ask-a-question-on-answers-and-get-a-fast-answer

You did not ask a question.