LAUNCHXL-F28379D: Communication error. LED D1, D9 and D10 always ON.

Hello,

I am trying to download a PWM generation program onto the LAUNCHXL-F28379D through Simulink, but I get the following error,

The following error occurred during deployment to your hardware board:

Debug Server Scripting (DSS) error:
*** User inputs:
      Target Configuration: C:\PROGRA~3\MATLAB\SUPPOR~1\R2018b\toolbox\target\SUPPOR~1\tic2000/CCS_CO~1/F28379~1.CCX
      Program Name: D:\matlab\models\spwmin.out
      Board Name: *
      CPU Name: C28xx_CPU1
      Hardware Name: TI_Delfino_F2837xD
*** Starting debug session...
SEVERE: IcePick_C_0: Error connecting to the target: (Error -2131 @ 0x0) Unable to access device register. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 8.0.903.2)
SEVERE: emulation failure occurred
SEVERE: Error connecting to the target: emulation failure occurred
*** Cannot create a valid debug session for Board/CPU=*/C28xx_CPU1.
      Make sure this matches only one board and one CPU.
      Exiting...

Also LED D1, D9 and D10 are always ON.

Just to make sure I was doing it right I tried to download an LED example onto the board via Simulink and I get the same following error

The following error occurred during deployment to your hardware board:

Debug Server Scripting (DSS) error:
*** User inputs:
      Target Configuration: C:\PROGRA~3\MATLAB\SUPPOR~1\R2018b\toolbox\target\SUPPOR~1\tic2000/CCS_CO~1/F28379~1.CCX
      Program Name: D:\matlab\models\LED.out
      Board Name: *
      CPU Name: C28xx_CPU1
      Hardware Name: TI_Delfino_F2837xD
*** Starting debug session...
SEVERE: IcePick_C_0: Error connecting to the target: (Error -2131 @ 0x0) Unable to access device register. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 8.0.903.2)
SEVERE: emulation failure occurred
SEVERE: Error connecting to the target: emulation failure occurred
*** Cannot create a valid debug session for Board/CPU=*/C28xx_CPU1.
      Make sure this matches only one board and one CPU.
      Exiting...

The LED D1, D9 and D10 are always ON.

I tried tapping the RESET button and changing USB port on my PC but the error still persists.

I tried configuring switch S1 as 1-UP, 2-UP and 3-DOWN and tapping RESET.

Still doesnt work.

Any help will be appreciated.

Thanks in advance

[Priyanka Ghosh]

Was this problem solved ? I have the same problem

[Utku Deniz Altiok]

I had the same problem as well could you solve it ?