you can consider following the below high-level way to create AM transmitter and receiver models:
AM Transmitter
Message Signal (Sine Wave): Start with generating a message signal. You can use aSine Waveblock for simplicity.
Carrier Signal: Generate a carrier signal using anotherSine Waveblock. The frequency of this signal should be significantly higher than that of the message signal.
Modulate the Signal: Use theAM Modulator Passbandblock from the Communications System Toolbox. Connect your message and carrier signals to this block. This block multiplies the message signal with the carrier signal, effectively modulating it.
Transmitting Antenna (Optional): While not necessary for simulation purposes, you can represent a transmitting antenna using aGainblock to simulate the effect of transmission power.
AM Receiver
Receive the Signal (Optional): If you're simulating an antenna, you can start with aGainblock to simulate the receiving antenna's characteristics.
Demodulate the Signal: Use theAM Demodulator Passbandblock from the Communications System Toolbox to demodulate the received signal. Connect your received signal to this block.
Extract the Message: The output of the demodulator will be your original message signal. You might need to adjust the gain or filter the output to correctly recover your message.
Visualize the Output: Use aScopeblock or aTo Audio Deviceblock (for audio signals) to listen to or visualize the recovered message signal.
No se puede completar la acción debido a los cambios realizados en la página. Vuelva a cargar la página para ver el estado actualizado.
Translated by
Seleccione un país/idioma
Seleccione un país/idioma para obtener contenido traducido, si está disponible, y ver eventos y ofertas de productos y servicios locales. Según su ubicación geográfica, recomendamos que seleccione: .
También puede seleccionar uno de estos países/idiomas:
Cómo obtener el mejor rendimiento
Seleccione China (en idioma chino o inglés) para obtener el mejor rendimiento. Los sitios web de otros países no están optimizados para ser accedidos desde su ubicación geográfica.