Is it possible to use Vehicle Network Toolbox with intrepid (vehicle spy) software?

From the documentation I can see that Intrepid Hardware is not supported for Vehicle Network Toolbox. But is it possible to have a Virtual CAN bus as an input in Vehicle Spy? This way, Vehicle Spy would actually be transmitting the values, but they would be generated from a Simulink Model.

Thanks,

Answer 1

[Siddhant Dange]

Hello Jose,

Unfortunately, Vehicle Spy does not support any other vendors than the ones provided by Intrepid Control Networks: https://cdn.intrepidcs.net/support/VehicleSpy/spyHard.htm. So, I do not believe you can create a virtual channel using any of our supported vendors (MathWorks, Kvaser or Vector) in Vehicle Spy.

Additionally, I am assuming you are trying to use the MathWorks Virtual Channels. These channels cannot be used outside of a single session of MATLAB or Simulink i.e. you cannot connect to a MathWorks Virtual Channel except in the session you are running it in: https://www.mathworks.com/help/vnt/ug/mathworks-virtual-channels.html.

Hope that helps,

Siddhant