Power tools Q-Bat use case

Versión 1.0.3 (14,3 MB) por QuickerSim
This repository shows how to model heat transfer in a power tool’s battery pack in Q-Bat from QuickerSim. The model consists 5 Li-ion cells
0.0
(0)
15 descargas
Actualizado 3 jun 2022
Ver licencia en GitHub

Heat transfer in a power tool’s battery pack modeled in Q-Bat

View Battery pack Simulink model with Q-Bat and Simscape on File Exchange

⬇️ Please use this link instead of the download button: Download link ⬇️

Run power_tools_demo.m or power_tools_demo_ls.mlx to get started

  • Please visit the Q-Bat and QuickerSim page to learn more about modeling heat transfer in 3-D systems.

This repository shows how to model heat transfer in a power tool’s battery pack in Q-Bat from QuickerSim. The model consists 5 Li-ion cells connected in series, terminals, connectors, holders and casing and is connected to a reduced-order model (ROM) to model heat transfer in 3D geometry.

The model will be simulated under 3 circumstances:

  1. Normal operation – Current profile consists of 24 reapeted cycles, which simulate screwing in a screw followed by a break. 360 seconds of operation in total.
  2. Rapid charging – 30 minutes of charging with constant current of 6A.
  3. Thermal propagation – One cell is heating significantly more due to malfunction. Heat dissipation from a faulty cell will be checked. 30 minutes of operation.

Simulation Model

Case 1

Case 2

Case 3

Citar como

QuickerSim (2024). Power tools Q-Bat use case (https://github.com/QuickerSim/Power-tools-Q-Bat-use-case/releases/tag/1.0.3), GitHub. Recuperado .

Compatibilidad con la versión de MATLAB
Se creó con R2022a
Compatible con cualquier versión desde R2018b
Compatibilidad con las plataformas
Windows macOS Linux

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

model

model/power_tools_simulink

model/power_tools_simulink/src/ele

model/power_tools_simulink/src/fem

model/power_tools_simulink/src/misc

model/power_tools_simulink

model

Versión Publicado Notas de la versión
1.0.3

See release notes for this release on GitHub: https://github.com/QuickerSim/Power-tools-Q-Bat-use-case/releases/tag/1.0.3
1.0.2.0

See release notes for this release on GitHub: https://github.com/QuickerSim/Power-tools-Q-Bat-use-case/releases/tag/1.0.2
1.0.1.0

See release notes for this release on GitHub: https://github.com/QuickerSim/Power-tools-Q-Bat-use-case/releases/tag/1.0.1
1.0.0

Para consultar o notificar algún problema sobre este complemento de GitHub, visite el repositorio de GitHub.
Para consultar o notificar algún problema sobre este complemento de GitHub, visite el repositorio de GitHub.