Community Profile

### Glasgow Caledonian University

Last seen: 4 meses hace Con actividad desde 2013

Python/MATLAB, AI, Deep learning, Signal & Image processing, Networking, Cybersecurity, Wireless communication

Programming Languages:
Python

All

Ver insignias

#### Content Feed

Ver por

Integer/Discrete Optimization with Simulated Annealing
Turning MATLAB's Simulated Annealing to Integer/Discrete Optimization

más de 3 años hace | 2 descargas |

Depth Estimation with Stereo Vision Using Two Single Cameras
Depth estimation using two single cameras. Make your own stereo camera

más de 3 años hace | 6 descargas |

3D Ray Tracing For Indoor Radio Propagation
3D Ray Tracing To Estimate Signal Strength in Indoor Environment and Estimate Propagation Loss

más de 3 años hace | 13 descargas |

Multi wall (COST231) Signal Propagation Models + Python Code
Estimates the propagation loss using COST231 & free-space path loss models

casi 4 años hace | 5 descargas |

PYTHON/MATLAB optimization for log-distance model + Example
Submission contains both Python and MATLAB codes. They demonstrate non-linear regression analysis (least square) of radio propag...

alrededor de 4 años hace | 5 descargas |

Pulse data segmentation
Optimized Pulsewidth, Extract single polarity pulses

casi 5 años hace | 2 descargas |

Respondida
How to get image in RGB
Hi I Can't find _*gray2rgb*_ function in MATLAB documentation! What does that do exactly? Have a look at this link, it may h...

alrededor de 6 años hace | 0

Electron Beam Measurement Using Deblurring (deconvolution)
APWD_V5 corrects the electron beam measurements suffering from linear motion blur.

alrededor de 6 años hace | 1 descarga |

Respondida
How to plot frequency spectrum of a signal in matlab?
Hi there! I don't know why your instructor didn't like it! Maybe it's missing a division and he is picky on that! fftNo...

más de 7 años hace | 1

Sudoko Solver
Solves Sudoko

más de 7 años hace | 1 descarga |

Simple Demo of Hough Transform Implementation
Simple Demo of Hough Transform Implementation

más de 7 años hace | 1 descarga |

Respondida
How to plot 2 histograms on the same axis?
Hi, Create a figure before using hist, create an axes in the figure and get its handle. Use hold command to allow multiple gr...

más de 7 años hace | 0

Respondida
How to design a high pass filter and test the filter by a signal
Hi, Type fdatool in the MATLAB command window. It opens the Filter Designa and Analysis window, where you can design your ...

más de 7 años hace | 0

Respondida
error while evaluating uimenu callback( in fuzzy toolbox)
Sounds like a terrible situation. You can't even open it to edit things. Is it possible to make a definition/coding violation in...

más de 7 años hace | 1

Respondida
How change somme values on a matrix?
Hi Biza, It sounds like you want to do thresholding. A = A>20; % this makes A a logical matrix of 0 and 1, 1 is when A <...

más de 7 años hace | 0

Respondida
I think my answer is not correct for this question, anyone can help me to check it? Thanks
Hi, It matches with your flowchart, Why do you thing it is not correct?

más de 7 años hace | 0

Respondida
Hi, I would like to ask if my answer is correct or not, here is the question.
Hi, Looks alright. You can use xlim, ylim to limit the view and see the zero crossing location better, however assuming th...

más de 7 años hace | 0

Respondida
I have some problem when plotting the graph, anyone can help? Thanks
Hi, You need to store y first. x = -10:10; for i = 1:numel(x) y(i) = 2^(0.4*x(i))+5 end plot(x,y,'g')

más de 7 años hace | 0

Respondida
Cross-correlation for signal matches
Dear Steven, Here is a example code i used to find the phase-shift between two different signals. I used cross-correlation to...

más de 7 años hace | 0

Respondida
How can I fix an Out of Memory error?
Hello Hadi, Mainly you're running out of RAM memory. You may have to modify your code to be able to run it. There are diff...

más de 7 años hace | 0

Respondida
How to have a GUI perform an action only when a pushbutton is pressed?
Hi Sicilian, I was searching how to do the same thing a few months ago. You want the motor to be on while you're holding t...

más de 7 años hace | 1

Respondida
Matlab - FFT of Gaussian - Equivalency
I'm not sure what you're intending to do. Do you know about fftshift() command? To me it sounds like you're having problem...

más de 7 años hace | 0

Respondida
how can I add zeros elements to a matrix?
Hi Moein, there are different ways to do this. One of which is to define a fully zero matrix with all zeros newMatrix = ...

más de 7 años hace | 6

Respondida
how to find variance of audio signal?
Hi, You can read the wav file with wavread() command and find the variance with var() command. Hope that's enough

más de 7 años hace | 0

Respondida
using subplot(m,n,p,ax) in a loop
Just put figure outside the loop. If you want to change each axis or maybe axes properties, use xlim ylim in your for loop y...

más de 7 años hace | 0

Respondida
drawing a triangular wave
Hi Soloby, You just asked a question on fuzzy logic, I assume this is in the same area! Have you tried trimf or trapmf mem...

más de 7 años hace | 0

Respondida
Fuzzy Operation (Add, subtract, multiply, and divide) without using the built-in matlab function?
Hi Soloby, What's y all of a sudden?!

más de 7 años hace | 0

Respondida
averages of a matrix
Hi Anthony, This is very basic, please read more output = mean(A.*B) That's all

más de 7 años hace | 1

Respondida
How to write a 'text' at the end of another one
Hi Alessandro, You have to use text, see matlab help for text please text(Xposition,Yposition,'Your String!'); To plo...

más de 7 años hace | 0

Respondida
Hi. i want to plot some thing like this picture how can i do this ?
You may have to do this with two plot commands, one to create a red line one to create a gigantic square, which you can do...

más de 7 años hace | 0