photo

Dhruv


Last seen: 2 días hace |  Con actividad desde 2024

Followers: 0   Following: 0

Estadística

  • 3 Month Streak
  • Knowledgeable Level 1
  • First Answer

Ver insignias

Feeds

Ver por

Respondida
Error "The board 'Standard Devices Serial Port' has no Analog Input channels." occurs when I run a Desktop Real Time model in kernel mode
Hi Haotian, To connect your self-made data acquisition device with Simulink Desktop Real-Time, I would recommend you to use the...

7 días hace | 0

Respondida
How to construct the Hinfinity controller for a mixed sensitivity problem with a plant P_0 as the converter in simulink?
Hi Alon, To construct an H-infinity controller for a mixed sensitivity problem in Simulink, follow these steps below: Define W...

7 días hace | 0

Respondida
I need help to solve this error.
Based on the results from the Diagnostic Viewer, it can be inferred that the error thrown is “No rule to make target”. This err...

alrededor de 2 meses hace | 0

Respondida
How do I create a Belt-Cable Spool with a variable diameter?
Hi Lucas, Modeling a belt-cable spool with a variable diameter, especially one with a semi-conical shape, would involve several...

alrededor de 2 meses hace | 0

Respondida
STM32F746G Discovery Board UDP Comms not Working
Hi Mike, Given your setup and the issue description, it seems you have covered basic network configurations. Since UDP comms wo...

alrededor de 2 meses hace | 0

Respondida
I find an error when execute FCW system tutorial when compile the application into a MEX function.
It appears you are utilizing the example "Forward Collision Warning Application with CAN FD and TCP/IP." The issue you are encou...

alrededor de 2 meses hace | 0

Respondida
Unable to open custom file while building model in Linux
Hi Shardul, To help resolve the issue, here are some steps which you can follow that might help you: Check for Case Sensitivit...

alrededor de 2 meses hace | 0

Respondida
Error using open ep/requirement/al/keys/RequirementsSourceKey when lauching Simulink Project
Hi Mohamed, To resolve this error, you might want to try out the following troubleshooting steps: Ensure that all necessary fi...

alrededor de 2 meses hace | 0

Respondida
I want to change the default UAV dynamics to the quadcopter to F450.
Hi Yasir, The link that you are trying to access seems to be invalid. However, you might want to refer to the following MathW...

alrededor de 2 meses hace | 0

Respondida
Unable to save file in simulink dictionary because not serializable
Hi Zeno, A potential reason why you might be encountering this is because MATLAB does not support the serialization of database...

2 meses hace | 0

Respondida
Display the information of variables in Matlab (Stateflow) by mouseover
Hi Patrick, I believe there is currently no option to enable a mouseover feature to display variable descriptions directly with...

2 meses hace | 0

Respondida
Python - unable to resolve py.XXXX on Matlab 2021b, Big Sur, M1 Chip
Hi Martin, I would recommend refering to the following MATLAB Answer post, which could provide a resolution to the issue: htt...

2 meses hace | 0

Respondida
Registration estimator app - "export as function", or "load image from workspace" not working. Ubuntu install R2021b.
Hi Samuel, I would suggest you to try out the following approaches: Reinstall the Existing Version: Try reinstalling your curr...

2 meses hace | 0

Respondida
Internal error while creating code interface description file: codeInfo.mat. Aborting code generation. (asbQuadcopter-parrot mambo-R2021b)
It is important to note that having multiple build folders on the MATLAB path is generally not recommended due to the potential ...

2 meses hace | 0

Respondida
Though my input and output data is inversely proportional, system identification toolbox is giving me a positive gain
Hi Saraswathi, There might be some areas where you can check for potential issues: Data Preprocessing: Ensure your input and o...

3 meses hace | 0

Respondida
Failed when install Simscape Multibody Link software. matlab2023a
Hi Yanzhi, To install the 'Simscape Multibody Link plugin', I suggest going through the following MATLAB Answers post, which pr...

3 meses hace | 0

Respondida
Error in Hierarchical Risk Parity Portfolio
Hi Sizwe, In the Hierarchical Risk Parity Portfolio example, the function 'getLeafNodesInGroup' is a local function and not an ...

3 meses hace | 0

Respondida
How to convert Simulink model into Matlab script .m file?
Hi Alireza, Unfortunately, Simulink files cannot be directly converted into .m files. However, to generate C code tailored to y...

3 meses hace | 0

Respondida
How to reduce the time required to execute Simulink.sdi.clear?
Hi Andrea, To minimize the execution time of 'Simulink.sdi.clear' in your workflow, ensure that you are only logging essential ...

3 meses hace | 0

Respondida
Error in sdo Aircraft Estimation
The error you are encountering indicates that MATLAB cannot find the ‘Optimization Toolbox’, which is required for the ‘fmincon’...

3 meses hace | 0

Respondida
C2000 microcontroller blocksets
Hi Akshay, I understand that you are encountering issues with the performance of program execution while making use of 'C2000 M...

3 meses hace | 0

Respondida
Can't connect multiple ev3 bricks to host computer using wifi
The error "Conversion to cell from char is not possible" occurs due to incorrect data type conversion. For example, the error ca...

3 meses hace | 0

Respondida
STM32F4xx Board missing SPI simulink blocks
Hi, I understand that the SPI blocks for STM32F4xx are not being displayed in the library block of the R2023b release of Simuli...

3 meses hace | 0

Respondida
i would like to run libsvm_classifer_spider.cpp but i am receiving 11:10: fatal error: mexarg.h: No such file or directory
Hi, The error message you are receiving indicates that the compiler cannot find the ‘mexarg.h’ header file, which is required f...

3 meses hace | 0

Respondida
Is It Possible To Enable The "Fit To Content" Formatting Option For Custom Blocks?
Hi Andrew, I understand that you are trying to use the 'Fit to Content' tool for your custom blocks. Currently, this option is ...

3 meses hace | 0

| aceptada

Respondida
Run comserver in R2020a failed
I understand that you are encountering an error while attempting to execute the "comserver('query')" command. If you are using M...

4 meses hace | 0

| aceptada

Respondida
Failed to download the party software: Sourcery G++ Lite
I understand you are encountering issues while attempting to download the Sourcery G++ Lite third-party software. Regrettably, t...

4 meses hace | 0

Respondida
Derivative of state '5' in block 'Simulation_of_Six_DoF_PADS/Integrator' at time 0.0 is not finite. The simulation will be stopped. There may be a singularity in the solution.
A possible reason for getting the error message 'Derivative of state '5' in block 'Simulatio​n_of_Six_D​oF_PADS/In​tegrator' at ...

4 meses hace | 0

Respondida
Port width/dimension error connected to a demux
The error concerning port width or dimension is a common issue encountered in Simulink, typically triggered when there is a mism...

4 meses hace | 0