Vasco Lenzi

MathWorks

Last seen: Today | Con actividad desde 2016

Followers: 0 Following: 0

Mensaje

Vasco is an Applications Engineer working especially in the fields of physical modeling and Control Design Automation. Before joining the Mathworks in 2016, Vasco worked at Liebherr Machines Bulle where he developed new control functions for different control units using Rapid Prototyping Systems and embedded code real time bypass. He was in charge and completely renew the company's library of physical models (from emission aftertreatment systems to diesel and gas engines) deployed to do real time HIL testing and embedded software validation. Vasco has a BSc as Mechanical Engineer (with participation in the Formula Student competition) and a Master degree in Energy Sciences and Technology, both of them obtained at the ETH Zurich.

Estadística

All

Ver insignias

Feeds

Respondida
Need to find block shaped in matlab
Hi, this is called the "probe" block from Simscape libraries (not to be mixed with Probe from Simulink libraries). You can use i...

3 meses hace | 0

| aceptada

Respondida
How use Three-Phase Dynamic Load block to generate Power data?
Hi Evode It's a limitation of the dynamic load block of the specialized power system libraries. See this example and this comme...

5 meses hace | 0

Respondida
State machine for grid connection - TIDM-SOLARUINV
Hi take a look at this page, there are examples and videos on this topic, including example on deployment on F28035 from Simulin...

6 meses hace | 0

| aceptada

Respondida
Ideal Translational Motion Sensor block(position) does not work on linear actuator model.
You are applying the sensors incorrectly. Please refer to this entry to understand acroos vs through variables and how to apply ...

8 meses hace | 0

| aceptada

Respondida
why do all matlab actuators examples use force as input source?.in real, force is output of actuators.
Hi, can you point out the examples you are referring to? Most of our highest fidelity examples, including FEM based blocks, don'...

8 meses hace | 0

| aceptada

Respondida
It is possible to upload a Simulink function to the C2000 controller using the C2000 Microcontroller Blockset tool
Hi Tania Is possible to generate code which goes on the C2000 from the vast majority of Simulink blocks (and MATLAB functions, ...

12 meses hace | 0

| aceptada

Respondida
How To Input Duty Ratio into Pulse Generator
I would like to provide an alternative block: since 2020b we ship a new PWM block in Simulink under "Discontinuities". This blo...

casi 2 años hace | 0

Respondida
why is it impossible to use the PID tuning app when tuning a PID controller used in circuits that have PWM switchings?
Hi Hassan in my video series on DCDC controller development I touched on this topic in part 4 and showcase how you can retrieve...

más de 2 años hace | 0

Respondida
Simscape multibody model is not following simulink output
Dear Omar, Simscape Multibody is an add on to Simscape and Simulink, and it works within the Simulink blank canvas, but his si...

más de 3 años hace | 0

| aceptada

Respondida
Simscape multibody model is not following simulink output
Hi Omar Your file doesn't work out of the box because the variable declaration or the data dictionary are missing. Can you add ...

más de 3 años hace | 0

Respondida
Switching losses of a MOSFET
Hi Arya Take a look at the ee_getPowerLossSummary function: https://www.mathworks.com/help/physmod/sps/ref/ee_getpowerlosssumm...

casi 4 años hace | 0

| aceptada

Respondida
Fields within Cell structures.
I would use Table instead of Struct https://www.mathworks.com/help/matlab/ref/table.html it would make your life sooooo much e...

casi 4 años hace | 0

Respondida
About Developing DC-DC Converter Control in Simulink- from Vivek Raju-
Hi Burak there may have been an error in parametrizing the MOSFET in simulation, which led to different results between simulat...

casi 4 años hace | 0

Respondida
How to get friction forces and support forces as vectors from Spatial Contact Force?
hi XiaoXing th output of the block are just magnitude. You can "create" a vecotr yourself by combining a Transform Sensor (to g...

casi 4 años hace | 0

Respondida
How can I do PIL (Raspberry pi + Simulink)?
Hi Mustafa I managed to get it working on raspi 3B+ with this file exchange entry: https://ch.mathworks.com/matlabcentral/file...

alrededor de 4 años hace | 0

Respondida
Simulink/SimscapeMultibody, using UDP in parallel, without blocking a simulation?
I'm not sure you can because of the nature of the UDB block, but you can try follow this workflow: https://ch.mathworks.com/he...

alrededor de 4 años hace | 0

Respondida
I have "Error evaluating 'PreCopyFcn' callback of DC Motor block (mask) 'Model_1/DC Motor'. Callback string is 'simscape.compiler.sli.internal.callback('PreCopyFcn',gcbh);' " this error. what should i do? help please
Hi Adarsh. It seems that you don't have a Simscape Electrical license. If you are a student, check with your university if they ...

alrededor de 4 años hace | 1

Respondida
Simscape model, not matching theoretical one.
Hi Kamyar as far as I can tell you are not closing the kinematic loop between multibody and the electric motor, so the rotation...

alrededor de 4 años hace | 0

| aceptada

Respondida
3d cad file to pump model
A lot is possible, but it depends on the level of fidelity you want to reach, and that should answer your "Should I ? " question...

alrededor de 4 años hace | 2

| aceptada

Respondida
Simscape Multibody Contact Forces Library keep passing through
It may have to do with the spring-damping parameters simulating the contact forces; if the object are too heavy, the will "break...

alrededor de 4 años hace | 0

Respondida
Where can I find spatial contact force Simscape function? Or library.
Hi Andy The official shipping spatial contact forces library comes with Simscape Multibody from 2019b onward. For release prior...

alrededor de 4 años hace | 1

| aceptada

Respondida
How can i add a table( A solid block with some legs) for the ramp shown here ?
H Ishan you could reuse the table in this example - or at least take an inspiration: https://www.mathworks.com/help/physmod/sm...

alrededor de 4 años hace | 0

| aceptada

Respondida
Cohesive Movement Simscape Multibody
Hi Leeann I run your model with all sinus connected to the joint and got this video. They are simply following your sinus input...

alrededor de 4 años hace | 0

| aceptada

Respondida
How can I link between Simscape mulyibody robot model and gazebo environment for simulation
Hi Catalin! Please take a look at the Robotics System Toolbox. It offers a native library to Simulink to perform co-simulation....

alrededor de 4 años hace | 0

Respondida
C# code sample to use shared library (dll) generated from Embedded Coder
hi PSK after you posted this some links are added automatically into your right. One of this brings you to this documentation p...

alrededor de 4 años hace | 0

Respondida
How to scope the real-time attitude and rotational velocity of a body in Simscape Multibody (matlab 2016b)
Hi Have you tried using the Transform Sensor? https://ch.mathworks.com/help/physmod/sm/ref/transformsensor.html?s_tid=srchtit...

alrededor de 4 años hace | 0

| aceptada

Respondida
Simscape simulation of a flexible thin plate
Hi Marius For the moment you cannot really model a foil in Multibody. There are workarounds, some more complex than others. If...

alrededor de 4 años hace | 0

Respondida
Simscape - Ideal Rotational Motion Sensor Angular Acceleration?
Hi there I've a modified version of the sensor outputting the acceleration as well. Be careful that you may need to filter the ...

alrededor de 4 años hace | 0

| aceptada

Respondida
Where can I find the source code of 3-Zone Pipe (2P)?
Hi Takahiro unfortunately most of the components in the Simscape Fluids library are not open. Only Simscape Foundation library...

alrededor de 4 años hace | 0

| aceptada

Respondida
the scope doesn't show the correct signal
Hi Cristian you modeled the circuit as open. Putting a voltage sensor there won't close the circuit to allow current to flow. S...

alrededor de 4 años hace | 0

| aceptada

Cargar más

Vasco Lenzi

MathWorks

Estadística

File Exchange

File Exchange

File Exchange

MATLAB Answers

MATLAB Answers

MATLAB Answers

MATLAB Answers

File Exchange

File Exchange

Community

Cody

Feeds