photo

Sam McDonald

MathWorks

Last seen: casi 5 años hace |  Con actividad desde 2016

Followers: 0   Following: 0

Mensaje

I'm an Application Support Engineer at MathWorks and a Mechanical Engineer by education.

I enjoy recording/mixing new music and outdoor exploration.
Professional Interests: MATLAB and Simulink

Estadística

All
  • Knowledgeable Level 3
  • Knowledgeable Level 2
  • First Answer
  • Solver

Ver insignias

Feeds

Ver por

Respondida
I have to simulations runing side by side one as a simulation and other on a real time PLC so the problem I am facing is to run both the simulation simultaneously. Is there any way to do it?
If you are interested in real-time testing using your PLC target hardware, we recommend using Simulink Real-Time to deploy your ...

alrededor de 7 años hace | 0

Respondida
Animating collision GUI - changing position
There are a few techniques for creating animations in MATLAB. Refer to these links for examples: <https://www.mathworks.com/h...

más de 7 años hace | 0

Respondida
Trimming multiple plots down to same time frame
I see two options. You can either 1) plot all the data and simply set the axis limits to only show the data you want to, or 2) t...

más de 7 años hace | 0

Respondida
How to find dc motor parameters
I am not positive on how you convert the motor specifications to the needed DC motor parameters in the Driveline example. There ...

más de 7 años hace | 1

Respondida
Multi-mass, damper, spring system in matlab
A solver like "ode45" would be the correct choice for a problem like this. It takes a function handle as its first argument of t...

más de 7 años hace | 0

Respondida
Error in SOR function.
I am able to execute the code you provided with no errors. You may have another function called "SOR" on your MATLAB path tha...

más de 7 años hace | 0

| aceptada

Respondida
the dialog box "getting started"
You can always navigate to the Getting Started page in the MATLAB documentation, which can be found on the MathWorks website or ...

más de 7 años hace | 0

Respondida
Undefined function 'trapmf' for input arguments of type 'double'.
Installation of thrid-party software may have currupted the MATLAB installation. A re-installation of MATLAB solves this issue

más de 7 años hace | 0

Respondida
Looking for the correct way to go about a Differential Equation in Matlab
If you want to solve this numerically, you will want to use a numerical solver like "ode45" instead of a symbolic solver like "d...

más de 7 años hace | 0

Respondida
Undefined function 'trapmf' for input arguments of type 'double'.
From what you have described, it does appear that your trial has expired, or at least MATLAB registers that the trial has expire...

más de 7 años hace | 0

Respondida
TwinCopter modeling // DOF regarding quad frame
You will need to place a 6-DOF Joint block connecting the World Frame and the body of the TwinCopter. The reference frame on the...

más de 7 años hace | 0

| aceptada

Respondida
How to fix an error when trying to create a geometry for PDE?
Use geometry functions to define the geometry as stated in the documentation: <https://www.mathworks.com/help/pde/ug/create-g...

más de 7 años hace | 0

Respondida
Matlab/ Simulink support for AUTOSAR naming convention
As mentioned in the <https://www.mathworks.com/help/ecoder/autosar/autosar.api.validatemodel.html documentation page>, the "auto...

más de 7 años hace | 0

Respondida
ginput turning off cursor R2016a
The cursor does disappear, but you should be able to see the crosshairs that appear once you move the mouse. If those are not be...

más de 7 años hace | 0

Respondida
How can I make the labels of components in appdesigner use the latex interpreter?
This is a limitation of App Designer. There is currently no way of setting a latex interpreter for text boxes. As somewhat of...

más de 7 años hace | 2

| aceptada

Respondida
Matlab very slow to startup in SCIF with no network access
Here are a few steps you can try: 1. Use the "timing" run-time option to get more information about which specific portion of...

más de 7 años hace | 0

Respondida
How to access the derivative of my Simulink states through the command model(t,x,u,'derivs')
You will need to compute the outputs of the model prior to computing the derivatives. The is likely the cause of you seeing the ...

más de 7 años hace | 0

| aceptada

Respondida
how can i create RMS and frequency detector?
The following links may be useful for you: Documentation page for RMS block in the DSP System Toolbox: <https://www.mathworks...

más de 7 años hace | 0

Respondida
Plot a bifurcation diagram for a 2 parameter family of 1D maps
I will address the plotting issues. There are two reasons for not seeing anything plotted. 1. Your data is outside the x and ...

más de 7 años hace | 0

| aceptada

Respondida
Simscape Multibody 2G // Change the direction of the axis of a joint primitive
The 2nd Generation joint blocks in Simscape Multibody define the primitive along one direction. For example, the Revolute Joint ...

más de 7 años hace | 0

| aceptada

Respondida
GUI figure doesn't move
Assuming you are using GUIDE to build your GUI, this may simply be a limitation of GUIDE or using MATLAB on multiple monitors. A...

más de 7 años hace | 0

Respondida
I am using Simscape multibody and would like to limit revolute joint movement between 0 and 90 degrees. How can I do this?
A similar question has been addressed in a previous post concerning this functionality in SimMechanics. The same workaround must...

más de 7 años hace | 1

Respondida
Maximum sampling frequency of ANALOG INPUT through Arduino UNO
Although the maximum reading rate for the analog pin is 10 kHz, this speed cannot be guaranteed with serial communication via Ar...

más de 7 años hace | 0

Respondida
Graphing the intensity to ultimately integrate and find the area of circles
If you want to extract data out of the image and plot the intensity on your own, I would suggest using the "improfile" function....

más de 7 años hace | 1

Respondida
Raspberry Pi Simulink Port Problem
Most error messages in Simulink try to point you to the cause of the issue and give you hints or suggestions to try. Have you tr...

más de 7 años hace | 0

Respondida
Plotting function over multiple periods
Since the "fplot" function accepts a symbol expression, you can simply add more symbolic data to it before calling the function....

más de 7 años hace | 0

| aceptada

Respondida
How, in Matlab, can i traverse a tree and save node numbers in a separate matrix in required order?
The code that was attached in the comment does perform the required calculations to construct each M matrix as described in the ...

más de 7 años hace | 0

| aceptada

Respondida
How to communicate with the Arduino-I2C in Simulink
If you are just getting started with Arduino and I2C, I would suggest reading the documentation. You can get to it by clicking t...

casi 8 años hace | 0

Respondida
plot legend disappears after resize
A "bodeplot" creates more than one axes and when calling "legend" without specifying the parent axes, MATLAB takes the last acti...

alrededor de 8 años hace | 0

Respondida
Hello, I want to create a video showing 3 separate plots progressing forward as an animation. Now, the data (x1, y1, x2, y2, x3, y3) is obtained from experimental results and not aperiodic equation. How do I do this?
I understand that you want to create an animation of three data sets being plotted over time. The code you provided performs the...

alrededor de 8 años hace | 0

Cargar más