This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.


Equivalent noise bandwidth of filter


bw = noisebw(num, den, numsamp, Fs)


bw = noisebw(num, den, numsamp, Fs) returns the two-sided equivalent noise bandwidth, in Hz, of a digital lowpass filter given in descending powers of z by numerator vector num and denominator vector den. The bandwidth is calculated over numsamp samples of the impulse response. Fs is the sampling rate of the signal that the filter would process; this is used as a scaling factor to convert a normalized unitless quantity into a bandwidth in Hz.


collapse all

Computes the equivalent noise bandwidth of a Butterworth filter over 100 samples of the impulse response.

Set the sampling rate, Nyquist frequency, and carrier frequency.

fs = 16;
fNyq = fs/2;
fc = 0.5;

Generate the Butterworth filter.

[num,den] = butter(2,fc/fNyq);

Determine the noise bandwidth.

bw = noisebw(num,den,100,fs)
bw = 1.1049


The two-sided equivalent noise bandwidth is


where h is the impulse response of the filter described by num and den, and N is numsamp.


[1] Jeruchim, Michel C., Philip Balaban, and K. Sam Shanmugan, Simulation of Communication Systems, New York, Plenum Press, 1992.

Introduced before R2006a