Histogram Properties
Histogram appearance and behavior
Histogram
properties control the appearance and behavior of
the histogram. By changing property values, you can modify aspects of the histogram. Use
dot notation to refer to a particular object and property:
h = histogram(randn(10,1)); c = h.BinWidth; h.BinWidth = 2;
Bins
NumBins
— Number of bins
positive integer
Number of bins, specified as a positive integer. If you do not specify
NumBins
, then histogram
automatically calculates how many bins to use based on the input data.
If you specify
NumBins
withBinMethod
,BinWidth
orBinEdges
,histogram
only honors the last parameter.This option does not apply to categorical data.
BinWidth
— Width of bins
positive scalar
Width of bins, specified as a positive scalar. If you specify BinWidth
,
then Histogram
can use a maximum of 65,536 bins (or 216). If the specified bin width requires more bins, then
histogram
uses a larger bin width
corresponding to the maximum number of bins.
For
datetime
andduration
data,BinWidth
can be a scalar duration or calendar duration.If you specify
BinWidth
withBinMethod
,NumBins
, orBinEdges
,histogram
only honors the last parameter.This option does not apply to categorical data.
Example:
uses
bins with a width of 5.histogram
(X,'BinWidth',5)
BinEdges
— Edges of bins
numeric vector
Edges of bins, specified as a numeric vector. The first element specifies the leading edge of the first bin. The last element specifies the trailing edge of the last bin. The trailing edge is only included for the last bin.
If you do not specify the bin edges, then histogram
automatically determines the bin edges.
If BinCountsMode
is "manual"
, then
BinEdges
must be a row vector.
If you specify
BinEdges
withBinMethod
,BinWidth
,NumBins
, orBinLimits
,histogram
only honorsBinEdges
andBinEdges
must be specified last.This option does not apply to categorical data.
BinLimits
— Bin limits
two-element vector
Bin limits, specified as a two-element vector, [bmin,bmax]
. The first
element indicates the first bin edge. The second element indicates the last bin
edge.
This option computes using only the data that falls within the bin limits
inclusively, X>=bmin & X<=bmax
.
This option does not apply to categorical data.
Example:
bins only the values in histogram
(X,'BinLimits',[1,10])X
that are between 1
and
10
inclusive.
BinLimitsMode
— Selection mode for bin limits
'auto'
(default) | 'manual'
Selection mode for bin limits, specified as 'auto'
or 'manual'
.
The default value is 'auto'
, so that the bin limits
automatically adjust to the data.
If you specify
BinLimits
orBinEdges
, thenBinLimitsMode
is set to'manual'
. SpecifyBinLimitsMode
as'auto'
to rescale the bin limits to the data.This option does not apply to histograms of categorical data.
BinMethod
— Binning algorithm
'auto'
(default) | 'scott'
| 'fd'
| 'integers'
| 'sturges'
| 'sqrt'
| ...
Binning algorithm, specified as one of the values in this table.
Value |
Description |
---|---|
|
The default |
|
Scott’s rule is optimal if the data is close
to being normally distributed. This rule is
appropriate for most other distributions, as well.
It uses a bin width of
|
| The Freedman-Diaconis rule is less sensitive to outliers in the data, and might be more
suitable for data with heavy-tailed distributions. It uses a bin width of
|
| The integer rule is useful with integer data, as it creates a bin for each integer. It uses a bin width of 1 and places bin edges halfway between integers. To avoid accidentally creating too many bins, you can use this rule to create a limit of 65536 bins (216). If the data range is greater than 65536, then the integer rule uses wider bins instead.
|
|
Sturges’ rule is popular due to its
simplicity. It chooses the number of bins to be
|
|
The Square Root rule is widely used in other
software packages. It chooses the number of bins
to be
|
histogram
adjusts the number of bins slightly so that
the bin edges fall on "nice" numbers, rather than using these exact formulas.
For datetime
or duration
data, specify the binning
algorithm as one of these units of time.
Value | Description | Data Type |
---|---|---|
"second" | Each bin is 1 second. | datetime and duration |
"minute" | Each bin is 1 minute. | datetime and duration |
"hour" | Each bin is 1 hour. | datetime and duration |
"day" | Each bin is 1 calendar day. This value accounts for daylight saving time shifts. | datetime and duration |
"week" | Each bin is 1 calendar week. | datetime only |
"month" | Each bin is 1 calendar month. | datetime only |
"quarter" | Each bin is 1 calendar quarter. | datetime only |
"year" | Each bin is 1 calendar year. This value accounts for leap days. | datetime and duration |
"decade" | Each bin is 1 decade (10 calendar years). | datetime only |
"century" | Each bin is 1 century (100 calendar years). | datetime only |
If you specify
BinMethod
fordatetime
orduration
data, thenhistogram
can use a maximum of 65,536 bins (or 216). If the specified bin duration requires more bins, thenhistogram
uses a larger bin width corresponding to the maximum number of bins.If you specify
BinLimits
,NumBins
,BinEdges
, orBinWidth
, thenBinMethod
is set to'manual'
.If you specify
BinMethod
withBinWidth
,NumBins
orBinEdges
,histogram
only honors the last parameter.This option does not apply to categorical data.
Example:
centers the bins on
integers.histogram
(X,'BinMethod','integers')
Categories
Categories
— Categories included in histogram
cell array of character vectors | categorical array | string array | pattern
scalar
Note
This option only applies to categorical histograms.
Categories included in histogram, specified as a cell array of character vectors, categorical
array, string array, or pattern
scalar.
If you specify an input categorical array
C
, then by default,histogram
plots a bar for each category inC
. In that case, useCategories
to specify a unique subset of the categories instead.If you specify bin counts, then
Categories
specifies the associated category names for the histogram.
Example: h = histogram(C,{'Large','Small'})
plots
only the categorical data in the categories 'Large'
and 'Small'
.
Example: histogram(C,"Y" + wildcardPattern)
plots data in the
categories whose names begin with the letter
Y
.
Example: histogram('Categories',{'Yes','No','Maybe'},'BinCounts',[22
18 3])
plots a histogram that has three categories with
the associated bin counts.
Example: h.Categories
queries
the categories that are in histogram object h
.
Data Types: cell
| categorical
| string
| pattern
DisplayOrder
— Category display order
'data'
(default) | 'ascend'
| 'descend'
Category display order, specified as 'data'
, 'ascend'
,
or 'descend'
.
'data'
— Use the category order in the input dataC
.'ascend'
— Display the histogram with increasing bar heights.'descend'
— Display the histogram with decreasing bar heights.
This option only works with categorical data.
NumDisplayBins
— Number of categories to display
scalar
Number of categories to display, specified as a scalar. You
can change the ordering of categories displayed in the histogram using
the 'DisplayOrder'
option.
This option only works with categorical data.
ShowOthers
— Toggle summary display of data belonging to undisplayed categories
'off'
(default) | on/off logical value
Toggle summary display of data belonging to undisplayed categories, specified as
'on'
or 'off'
, or as numeric or logical
1
(true
) or 0
(false
). A value of 'on'
is equivalent to
true
, and 'off'
is equivalent to
false
. Thus, you can use the value of this property as a logical
value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
Set this option to
'on'
to display an additional bar in the histogram with the name'Others'
. This extra bar counts all elements that do not belong to categories displayed in the histogram.You can change the number of categories displayed in the histogram, as well as their order, using the
'NumDisplayBins'
and'DisplayOrder'
options.This option only works with categorical data.
Data
Data
— Data to distribute among bins
vector | matrix | multidimensional array | categorical array
Data to distribute among bins, specified as a vector, matrix,
multidimensional array, or categorical array. If Data
is
not a vector, then histogram
treats it as a single column
vector, Data(:)
, and plots a single histogram.
histogram
ignores all NaN
,
NaT
, and undefined categorical values. Similarly,
histogram
ignores Inf
and
-Inf
values unless the bin edges explicitly specify
Inf
or -Inf
as a bin edge.
Although NaN
, NaT
,
Inf
, -Inf
, and
<undefined>
values are typically not plotted, they
are still included in normalization calculations that include the total
number of data elements, such as 'probability'
.
You can only specify categorical values for Data
if the
histogram object was originally created using categoricals.
Data Types: single
| double
| int8
| int16
| int32
| int64
| uint8
| uint16
| uint32
| uint64
| logical
| categorical
| datetime
| duration
Values
— Bin values
numeric vector
This property is read-only.
Bin values, returned as a numeric vector. If
Normalization
is 'count'
(the
default), then the k
th element in
Values
specifies how many elements of
Data
fall in the k
th bin interval
(bin counts). The last bin includes values that are on
either bin edge, but all other bins only include
values that fall on the leading edge.
Depending on the value of Normalization
, the
Values
property can instead contain a normalized
variant of the bin counts.
Normalization
— Type of normalization
'count'
(default) | 'probability'
| 'percentage'
| 'countdensity'
| 'cumcount'
| 'pdf'
| 'cdf'
Type of normalization, specified as one of the values in this table. For each bin
i
:
is the bin value.
is the number of elements in the bin.
is the width of the bin.
is the number of elements in the input data. This value can be greater than the binned data if the data contains missing values, such as
NaN
, or if some of the data lies outside the bin limits.
Value | Bin Values | Notes |
---|---|---|
'count' (default) |
|
|
'probability' |
|
|
'percentage' |
|
|
'countdensity' |
|
|
'cumcount' |
|
|
'pdf' |
|
|
'cdf' |
|
|
Example:
bins the data using an estimate of
the probability density function.histogram
(X,'Normalization','pdf')
BinCounts
— Bin counts
vector
Bin counts, specified as a vector. Use this input to pass bin counts to
histogram
when the bin counts calculation is
performed separately and you do not want histogram
to
do any data binning.
The length of counts
must be equal to the number of
bins.
For numeric histograms, the number of bins is
length(edges)-1
.For categorical histograms, the number of bins is equal to the number of categories.
Compared to the Values
property,
BinCounts
is not normalized. If
Normalization
is 'count'
, then
Values
and BinCounts
are
equivalent.
Example: histogram('BinEdges',-2:2,'BinCounts',[5 8 15
9])
Example: histogram('Categories',{'Yes','No','Maybe'},'BinCounts',[22
18 3])
BinCountsMode
— Selection mode for bin counts
'auto'
(default) | 'manual'
Selection mode for bin counts, specified as 'auto'
or
'manual'
. The default value is
'auto'
, so that the bin counts are automatically
computed from Data
and
BinEdges
.
If you specify BinCounts
, then
BinCountsMode
is automatically set to
'manual'
. Similarly, if you specify
Data
, then BinCountsMode
is
automatically set to 'auto'
.
Color and Styling
DisplayStyle
— Histogram display style
'bar'
(default) | 'stairs'
Histogram display style, specified as either 'bar'
or
'stairs'
.
'bar'
— Display a histogram bar plot over each window ofA
. This method is useful for reducing periodic trends in data.'stairs'
— Display a stairstep plot, which displays the outline of the histogram without filling the interior.
Example: histogram(X,'DisplayStyle','stairs')
plots
the outline of the histogram.
Orientation
— Orientation of bars
'vertical'
(default) | 'horizontal'
Orientation of bars, specified as 'vertical'
or 'horizontal'
.
Example: histogram(X,'Orientation','horizontal')
creates
a histogram plot with horizontal bars.
BarWidth
— Relative width of categorical bars
0.9
(default) | scalar in range [0,1]
Relative width of categorical bars, specified as a scalar value
in the range [0,1]
. Use this property to control
the separation of categorical bars within the histogram. The default
value is 0.9
, which means that the bar width is
90% of the space from the previous bar to the next bar, with 5% of
that space on each side.
If BarWidth
is 1
, then adjacent bars touch.
This option only works with categorical data.
Example: 0.5
FaceColor
— Histogram bar color
'auto'
(default) | 'none'
| RGB triplet | hexadecimal color code | color name
Histogram bar color, specified as one of these values:
'none'
— Bars are not filled.'auto'
— Histogram bar color is chosen automatically (default).RGB triplet, hexadecimal color code, or color name — Bars are filled with the specified color.
RGB triplets and hexadecimal color codes are useful for specifying custom colors.
An RGB triplet is a three-element row vector whose elements specify the intensities of the red, green, and blue components of the color. The intensities must be in the range
[0,1]
; for example,[0.4 0.6 0.7]
.A hexadecimal color code is a character vector or a string scalar that starts with a hash symbol (
#
) followed by three or six hexadecimal digits, which can range from0
toF
. The values are not case sensitive. Thus, the color codes"#FF8800"
,"#ff8800"
,"#F80"
, and"#f80"
are equivalent.
Alternatively, you can specify some common colors by name. This table lists the named color options, the equivalent RGB triplets, and hexadecimal color codes.
Color Name Short Name RGB Triplet Hexadecimal Color Code Appearance "red"
"r"
[1 0 0]
"#FF0000"
"green"
"g"
[0 1 0]
"#00FF00"
"blue"
"b"
[0 0 1]
"#0000FF"
"cyan"
"c"
[0 1 1]
"#00FFFF"
"magenta"
"m"
[1 0 1]
"#FF00FF"
"yellow"
"y"
[1 1 0]
"#FFFF00"
"black"
"k"
[0 0 0]
"#000000"
"white"
"w"
[1 1 1]
"#FFFFFF"
Here are the RGB triplets and hexadecimal color codes for the default colors MATLAB® uses in many types of plots.
RGB Triplet Hexadecimal Color Code Appearance [0 0.4470 0.7410]
"#0072BD"
[0.8500 0.3250 0.0980]
"#D95319"
[0.9290 0.6940 0.1250]
"#EDB120"
[0.4940 0.1840 0.5560]
"#7E2F8E"
[0.4660 0.6740 0.1880]
"#77AC30"
[0.3010 0.7450 0.9330]
"#4DBEEE"
[0.6350 0.0780 0.1840]
"#A2142F"
If you specify DisplayStyle
as 'stairs'
, then
histogram
does not use the
FaceColor
property.
Example:
creates a histogram plot with green
bars.histogram
(X,'FaceColor','g')
EdgeColor
— Histogram edge color
[0 0 0]
or black (default) | 'none'
| 'auto'
| RGB triplet | hexadecimal color code | color name
Histogram edge color, specified as one of these values:
'none'
— Edges are not drawn.'auto'
— Color of each edge is chosen automatically.RGB triplet, hexadecimal color code, or color name — Edges use the specified color.
RGB triplets and hexadecimal color codes are useful for specifying custom colors.
An RGB triplet is a three-element row vector whose elements specify the intensities of the red, green, and blue components of the color. The intensities must be in the range
[0,1]
; for example,[0.4 0.6 0.7]
.A hexadecimal color code is a character vector or a string scalar that starts with a hash symbol (
#
) followed by three or six hexadecimal digits, which can range from0
toF
. The values are not case sensitive. Thus, the color codes"#FF8800"
,"#ff8800"
,"#F80"
, and"#f80"
are equivalent.
Alternatively, you can specify some common colors by name. This table lists the named color options, the equivalent RGB triplets, and hexadecimal color codes.
Color Name Short Name RGB Triplet Hexadecimal Color Code Appearance "red"
"r"
[1 0 0]
"#FF0000"
"green"
"g"
[0 1 0]
"#00FF00"
"blue"
"b"
[0 0 1]
"#0000FF"
"cyan"
"c"
[0 1 1]
"#00FFFF"
"magenta"
"m"
[1 0 1]
"#FF00FF"
"yellow"
"y"
[1 1 0]
"#FFFF00"
"black"
"k"
[0 0 0]
"#000000"
"white"
"w"
[1 1 1]
"#FFFFFF"
Here are the RGB triplets and hexadecimal color codes for the default colors MATLAB uses in many types of plots.
RGB Triplet Hexadecimal Color Code Appearance [0 0.4470 0.7410]
"#0072BD"
[0.8500 0.3250 0.0980]
"#D95319"
[0.9290 0.6940 0.1250]
"#EDB120"
[0.4940 0.1840 0.5560]
"#7E2F8E"
[0.4660 0.6740 0.1880]
"#77AC30"
[0.3010 0.7450 0.9330]
"#4DBEEE"
[0.6350 0.0780 0.1840]
"#A2142F"
Example:
creates a histogram plot with red bar
edges.histogram
(X,'EdgeColor','r')
FaceAlpha
— Transparency of histogram bars
0.6
(default) | scalar value in range [0,1]
Transparency of histogram bars, specified as a scalar value in range
[0,1]
. histogram
uses the
same transparency for all the bars of the histogram. A value of 1
means fully opaque and 0
means completely transparent
(invisible).
Example:
creates a histogram plot with fully opaque
bars.histogram
(X,'FaceAlpha',1)
EdgeAlpha
— Transparency of histogram bar edges
1
(default) | scalar in range [0,1]
Transparency of histogram bar edges, specified as a scalar value in the
range [0,1]
. A value of 1
means fully
opaque and 0
means completely transparent
(invisible).
Example:
creates a histogram plot with
semi-transparent bar edges. histogram
(X,'EdgeAlpha',0.5)
LineStyle
— Line style
"-"
(default) | "--"
| ":"
| "-."
| "none"
Line style, specified as one of the options listed in this table.
Line Style | Description | Resulting Line |
---|---|---|
"-" | Solid line |
|
"--" | Dashed line |
|
":" | Dotted line |
|
"-." | Dash-dotted line |
|
"none" | No line | No line |
LineWidth
— Width of bar outlines
0.5
(default) | positive value
Width of bar outlines, specified as a positive value in point units. One point equals 1/72 inch.
Example: 1.5
Data Types: single
| double
| int8
| int16
| int32
| int64
| uint8
| uint16
| uint32
| uint64
SeriesIndex
— Series index
positive integer | "none"
Series index, specified as a positive integer or "none"
. This property is
useful for reassigning the face colors of Histogram
objects so that
they match the colors of other objects.
By default, the SeriesIndex
property of a Histogram
object is a number that corresponds to its order of creation, starting at
1
. MATLAB uses the number to calculate indices for assigning colors when you call
plotting functions. The indices refer to the rows of the arrays stored in the
ColorOrder
property of the axes. Any objects in the axes that
have the same SeriesIndex
number will have the same color.
A SeriesIndex
value of "none"
corresponds to a
neutral color that does not participate in the indexing scheme.
How Manual Color Assignment Overrides SeriesIndex
Behavior
To manually control face color, set the FaceColor
property of
the Histogram
object to a color value, such as a color name or
an RGB triplet.
When you manually set the face color of a Histogram
object,
MATLAB disables automatic color selection for that object and allows your
color to persist, regardless of the value of the SeriesIndex
property.
To enable automatic selection again, set the SeriesIndex
property to positive integer, and set the FaceColor
property to
"auto"
.
In some cases, MATLAB sets the SeriesIndex
value to
0
, which also disables automatic color selection.
Legend
DisplayName
— Text used by legend
variable name of Data
or
''
(default) | character vector
Text used by the legend, specified as a character vector. The text appears next to an icon of the histogram.
Example: 'Text Description'
For multiline text, create the character vector using
sprintf
with the new line character
\n
.
Example: sprintf('line one\nline two')
Alternatively, you can specify the legend text using the legend
function.
If you specify the text as an input argument to the
legend
function, then the legend uses the specified text and sets theDisplayName
property to the same value.If you do not specify the text as an input argument to the
legend
function, then the legend uses the text in theDisplayName
property. The default value ofDisplayName
is one of these values.For numeric inputs,
DisplayName
is a character vector representing the variable name of the input data used to construct the histogram. If the input data does not have a variable name, thenDisplayName
is empty,''
.For categorical array inputs,
DisplayName
is empty,''
.
If the DisplayName
property does not
contain any text, then the legend generates a character vector. The
character vector has the form 'dataN'
, where
N
is the number assigned to the histogram object based on its location in the list of legend
entries.
If you edit interactively the character vector in an existing legend, then
MATLAB updates the DisplayName
property to the
edited character vector.
Annotation
— Include object in legend
Annotation
object
Include the object in the legend, specified as an Annotation
object. Set the underlying IconDisplayStyle
property of the
Annotation
object to one of these values:
"on"
— Include the object in the legend (default)."off"
— Do not include the object in the legend.
For example, to exclude the Histogram
object named
obj
from the legend, set the IconDisplayStyle
property to "off"
.
obj.Annotation.LegendInformation.IconDisplayStyle = "off";
Alternatively, you can control the items in a legend using the legend
function. Specify the first input argument as a vector of the
graphics objects to include. If you do not specify an existing graphics object in the
first input argument, then it does not appear in the legend. However, graphics objects
added to the axes after the legend is created do appear in the legend. Consider creating
the legend after creating all the plots to avoid extra items.
Interactivity
Visible
— State of visibility
"on"
(default) | on/off logical value
State of visibility, specified as "on"
or "off"
, or as
numeric or logical 1
(true
) or
0
(false
). A value of "on"
is equivalent to true
, and "off"
is equivalent to
false
. Thus, you can use the value of this property as a logical
value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
"on"
— Display the object."off"
— Hide the object without deleting it. You still can access the properties of an invisible object.
DataTipTemplate
— Data tip content
DataTipTemplate
object
Data tip content, specified as a DataTipTemplate
object. You can
control the content that appears in a data tip by modifying the properties of the
underlying DataTipTemplate
object. For a list of properties, see
DataTipTemplate Properties.
For an example of modifying data tips, see Create Custom Data Tips.
Note
The DataTipTemplate
object is not returned by
findobj
or findall
, and it is not
copied by copyobj
.
ContextMenu
— Context menu
empty GraphicsPlaceholder
array (default) | ContextMenu
object
Context menu, specified as a ContextMenu
object. Use this property
to display a context menu when you right-click the object. Create the context menu using
the uicontextmenu
function.
Note
If the PickableParts
property is set to
'none'
or if the HitTest
property is set
to 'off'
, then the context menu does not appear.
Selected
— Selection state
'off'
(default) | on/off logical value
Selection state, specified as 'on'
or 'off'
, or as
numeric or logical 1
(true
) or
0
(false
). A value of 'on'
is equivalent to true, and 'off'
is equivalent to
false
. Thus, you can use the value of this property as a logical
value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
'on'
— Selected. If you click the object when in plot edit mode, then MATLAB sets itsSelected
property to'on'
. If theSelectionHighlight
property also is set to'on'
, then MATLAB displays selection handles around the object.'off'
— Not selected.
SelectionHighlight
— Display of selection handles
'on'
(default) | on/off logical value
Display of selection handles when selected, specified as 'on'
or
'off'
, or as numeric or logical 1
(true
) or 0
(false
). A
value of 'on'
is equivalent to true, and 'off'
is
equivalent to false
. Thus, you can use the value of this property as
a logical value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
'on'
— Display selection handles when theSelected
property is set to'on'
.'off'
— Never display selection handles, even when theSelected
property is set to'on'
.
Callbacks
ButtonDownFcn
— Mouse-click callback
''
(default) | function handle | cell array | character vector
Mouse-click callback, specified as one of these values:
Function handle
Cell array containing a function handle and additional arguments
Character vector that is a valid MATLAB command or function, which is evaluated in the base workspace (not recommended)
Use this property to execute code when you click the object. If you specify this property using a function handle, then MATLAB passes two arguments to the callback function when executing the callback:
Clicked object — Access properties of the clicked object from within the callback function.
Event data — Empty argument. Replace it with the tilde character (
~
) in the function definition to indicate that this argument is not used.
For more information on how to use function handles to define callback functions, see Create Callbacks for Graphics Objects.
Note
If the PickableParts
property is set to 'none'
or
if the HitTest
property is set to 'off'
,
then this callback does not execute.
CreateFcn
— Creation function
''
(default) | function handle | cell array | character vector
Object creation function, specified as one of these values:
Function handle.
Cell array in which the first element is a function handle. Subsequent elements in the cell array are the arguments to pass to the callback function.
Character vector containing a valid MATLAB expression (not recommended). MATLAB evaluates this expression in the base workspace.
For more information about specifying a callback as a function handle, cell array, or character vector, see Create Callbacks for Graphics Objects.
This property specifies a callback function to execute when MATLAB creates the object. MATLAB initializes all property values before executing the CreateFcn
callback. If you do not specify the CreateFcn
property, then MATLAB executes a default creation function.
Setting the CreateFcn
property on an existing component has no effect.
If you specify this property as a function handle or cell array, you can access the object that is being created using the first argument of the callback function. Otherwise, use the gcbo
function to access the object.
DeleteFcn
— Deletion function
''
(default) | function handle | cell array | character vector
Object deletion function, specified as one of these values:
Function handle.
Cell array in which the first element is a function handle. Subsequent elements in the cell array are the arguments to pass to the callback function.
Character vector containing a valid MATLAB expression (not recommended). MATLAB evaluates this expression in the base workspace.
For more information about specifying a callback as a function handle, cell array, or character vector, see Create Callbacks for Graphics Objects.
This property specifies a callback function to execute when MATLAB deletes the object. MATLAB executes the DeleteFcn
callback before destroying the
properties of the object. If you do not specify the DeleteFcn
property, then MATLAB executes a default deletion function.
If you specify this property as a function handle or cell array, you can access the object that is being deleted using the first argument of the callback function. Otherwise, use the gcbo
function to access the object.
Callback Execution Control
Interruptible
— Callback interruption
'on'
(default) | on/off logical value
Callback interruption, specified as 'on'
or 'off'
, or as
numeric or logical 1
(true
) or
0
(false
). A value of 'on'
is equivalent to true
, and 'off'
is equivalent to
false
. Thus, you can use the value of this property as a logical
value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
This property determines if a running callback can be interrupted. There are two callback states to consider:
The running callback is the currently executing callback.
The interrupting callback is a callback that tries to interrupt the running callback.
MATLAB determines callback interruption behavior whenever it executes a command that
processes the callback queue. These commands include drawnow
, figure
, uifigure
, getframe
, waitfor
, and pause
.
If the running callback does not contain one of these commands, then no interruption occurs. MATLAB first finishes executing the running callback, and later executes the interrupting callback.
If the running callback does contain one of these commands, then the
Interruptible
property of the object that owns the running
callback determines if the interruption occurs:
If the value of
Interruptible
is'off'
, then no interruption occurs. Instead, theBusyAction
property of the object that owns the interrupting callback determines if the interrupting callback is discarded or added to the callback queue.If the value of
Interruptible
is'on'
, then the interruption occurs. The next time MATLAB processes the callback queue, it stops the execution of the running callback and executes the interrupting callback. After the interrupting callback completes, MATLAB then resumes executing the running callback.
Note
Callback interruption and execution behave differently in these situations:
If the interrupting callback is a
DeleteFcn
,CloseRequestFcn
, orSizeChangedFcn
callback, then the interruption occurs regardless of theInterruptible
property value.If the running callback is currently executing the
waitfor
function, then the interruption occurs regardless of theInterruptible
property value.If the interrupting callback is owned by a
Timer
object, then the callback executes according to schedule regardless of theInterruptible
property value.
BusyAction
— Callback queuing
'queue'
(default) | 'cancel'
Callback queuing, specified as 'queue'
or 'cancel'
. The BusyAction
property determines how MATLAB handles the execution of interrupting callbacks. There are two callback states to consider:
The running callback is the currently executing callback.
The interrupting callback is a callback that tries to interrupt the running callback.
The BusyAction
property determines callback queuing behavior only
when both of these conditions are met:
Under these conditions, the BusyAction
property of the
object that owns the interrupting callback determines how MATLAB handles the interrupting callback. These are possible values of the
BusyAction
property:
'queue'
— Puts the interrupting callback in a queue to be processed after the running callback finishes execution.'cancel'
— Does not execute the interrupting callback.
PickableParts
— Ability to capture mouse clicks
'visible'
(default) | 'none'
Ability to capture mouse clicks, specified as one of these values:
'visible'
— Capture mouse clicks only when visible. TheVisible
property must be set to'on'
. TheHitTest
property determines if theHistogram
object responds to the click or if an ancestor does.'none'
— Cannot capture mouse clicks. Clicking theHistogram
object passes the click to the object behind it in the current view of the figure window. TheHitTest
property of theHistogram
object has no effect.
HitTest
— Response to captured mouse clicks
'on'
(default) | on/off logical value
Response to captured mouse clicks, specified as 'on'
or
'off'
, or as numeric or logical 1
(true
) or 0
(false
). A
value of 'on'
is equivalent to true, and 'off'
is
equivalent to false
. Thus, you can use the value of this property as
a logical value. The value is stored as an on/off logical value of type matlab.lang.OnOffSwitchState
.
'on'
— Trigger theButtonDownFcn
callback of theHistogram
object. If you have defined theContextMenu
property, then invoke the context menu.'off'
— Trigger the callbacks for the nearest ancestor of theHistogram
object that meets one of these conditions:HitTest
property is set to'on'
.PickableParts
property is set to a value that enables the ancestor to capture mouse clicks.
Note
The PickableParts
property determines if
the Histogram
object can capture
mouse clicks. If it cannot, then the HitTest
property
has no effect.
BeingDeleted
— Deletion status
on/off logical value
This property is read-only.
Deletion status, returned as an on/off logical value of type matlab.lang.OnOffSwitchState
.
MATLAB sets the BeingDeleted
property to
'on'
when the DeleteFcn
callback begins
execution. The BeingDeleted
property remains set to
'on'
until the component object no longer exists.
Check the value of the BeingDeleted
property to verify that the object is not about to be deleted before querying or modifying it.
Parent/Child
Parent
— Parent
Axes
object | PolarAxes
object | Group
object | Transform
object
Parent, specified as an Axes
,
PolarAxes
, Group
, or
Transform
object.
Children
— Children
empty GraphicsPlaceholder
array | DataTip
object array
Children, returned as an empty GraphicsPlaceholder
array or a
DataTip
object array. Use this property to view a list of data tips
that are plotted on the chart.
You cannot add or remove children using the Children
property. To add a
child to this list, set the Parent
property of the
DataTip
object to the chart object.
HandleVisibility
— Visibility of object handle
"on"
(default) | "off"
| "callback"
Visibility of the object handle in the Children
property
of the parent, specified as one of these values:
"on"
— Object handle is always visible."off"
— Object handle is invisible at all times. This option is useful for preventing unintended changes by another function. SetHandleVisibility
to"off"
to temporarily hide the handle during the execution of that function."callback"
— Object handle is visible from within callbacks or functions invoked by callbacks, but not from within functions invoked from the command line. This option blocks access to the object at the command line, but permits callback functions to access it.
If the object is not listed in the Children
property of the parent, then
functions that obtain object handles by searching the object hierarchy or querying
handle properties cannot return it. Examples of such functions include the
get
, findobj
, gca
, gcf
, gco
, newplot
, cla
, clf
, and close
functions.
Hidden object handles are still valid. Set the root ShowHiddenHandles
property to "on"
to list all object handles regardless of their
HandleVisibility
property setting.
Identifiers
Type
— Type of graphics object
'histogram'
| 'categoricalhistogram'
This property is read-only.
Type of graphics object, returned as either 'histogram'
or 'categoricalhistogram'
. Use this property to find all
objects of a given type within a plotting hierarchy, such as searching for
the type using findobj
.
Tag
— Object identifier
''
(default) | character vector | string scalar
Object identifier, specified as a character vector or string scalar. You can specify a unique Tag
value to serve as an identifier for an object. When you need access to the object elsewhere in your code, you can use the findobj
function to search for the object based on the Tag
value.
UserData
— User data
[]
(default) | array
User data, specified as any MATLAB array. For example, you can specify a scalar, vector, matrix, cell array, character array, table, or structure. Use this property to store arbitrary data on an object.
If you are working in App Designer, create public or private properties in the app to share data instead of using the UserData
property. For more information, see Share Data Within App Designer Apps.
Version History
Introduced in R2014bR2023b: Normalize using percentages
You can create histograms with percentages on the vertical axis by setting the
Normalization
property to
'percentage'
.
R2023b: Opt out of automatic color selection with SeriesIndex="none"
Opt out of automatic color selection for Histogram
objects by setting the
SeriesIndex
property to "none"
. When you specify
"none"
, the Histogram
object has a neutral
color.
To enable automatic color selection again, set the SeriesIndex
property to a positive whole number.
R2020a: Control automatic color selection with the SeriesIndex
property
Control how Histogram
objects vary in color by setting the
SeriesIndex
property. This property is useful when you want to
match the colors of different objects in the axes.
R2020a: UIContextMenu
property is not recommended
Starting in R2020a, using the UIContextMenu
property to
assign a context menu to a graphics object or UI component is not recommended. Use
the ContextMenu
property instead. The property values are the
same.
There are no plans to remove support for the UIContextMenu
property at this time. However, the UIContextMenu
property no
longer appears in the list returned by calling the get
function
on a graphics object or UI component.
Comando de MATLAB
Ha hecho clic en un enlace que corresponde a este comando de MATLAB:
Ejecute el comando introduciéndolo en la ventana de comandos de MATLAB. Los navegadores web no admiten comandos de MATLAB.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)