# mcxGate

**Installation Required:** This functionality requires MATLAB Support Package for Quantum Computing.

## Description

applies a multi-controlled X (MCX) gate. This gate operates on a single target qubit based
on the states of the control qubits, with a number of ancilla qubits that do not affect the
operation. If all control qubits are in the $$|1\rangle $$ state, then this gate applies a Pauli X gate (`cg`

= mcxGate(`controlQubits`

,`targetQubit`

,`ancillaQubits`

)`xGate`

or
the equivalent classical NOT gate) to the target qubit. Otherwise, the gate has no effect on
the target qubit.

The qubit indices in `controlQubits`

, `targetQubit`

,
and `ancillaQubits`

must not be the same.

## Examples

### Multi-Controlled X Gate with Three Control Qubits and One Target Qubit

Create an MCX gate with three control qubits, one target qubit, and no ancilla qubits.

cg = mcxGate(1:3,4,[])

cg = CompositeGate with properties: Name: "mcx" ControlQubits: [1×0 double] TargetQubits: [4×1 double] Gates: [15×1 quantum.gate.SimpleGate]

Plot the returned MCX gate to show its 15 internal gates. This MCX gate consists of two Hadamard gates, seven R1 gates, and six controlled X gates (CNOT gates). The Hadamard gates at the beginning and end of the internal gates are used to transform the state of the target qubit from the Z basis to the X basis and from the X basis to the Z basis.

plot(cg)

Get the matrix representation of this MCX gate. Because the matrix operations for the internal gates accumulate machine precision errors, round the matrix representation of this gate for clarity.

M = round(getMatrix(cg),8)

M = 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0

### Multi-Controlled X Gate with Ancilla Qubit

Create an MCX gate with three control qubits, one target qubit, and one ancilla qubit.

cg = mcxGate(1:3,4,5)

cg = CompositeGate with properties: Name: "mcx" ControlQubits: [1×0 double] TargetQubits: [5×1 double] Gates: [4×1 quantum.gate.SimpleGate]

Plot the returned MCX gate to show its four internal gates. This MCX gate consists of four controlled controlled X gates (CCX or CCNOT gates). The implementation of the MCX gate with one ancilla qubit requires fewer gates than the implementation with no ancilla qubits.

plot(cg)

### Quantum Circuit with Multi-Controlled X Gates

Create a quantum circuit that consists of two MCX gates. The first MCX gate has control qubits with indices 1 to 3 and a target qubit with index 4 (without any ancilla qubits). The second MCX gate has control qubits with indices 3 to 5, a target qubit with index 2, and an ancilla qubit with index 6.

gates = [mcxGate(1:3,4,[]); mcxGate(3:5,2,6)]; c = quantumCircuit(gates)

c = quantumCircuit with properties: NumQubits: 6 Gates: [2×1 quantum.gate.CompositeGate] Name: ""

Plot the quantum circuit.

plot(c)

The plotted circuit consists of six qubits with indices 1 to 6. The plot shows that qubits 1 to 4 of the outer circuit are mapped to qubits 1 to 4 of the inner circuit of internal gates that construct the first MCX gate. For the second MCX gate, qubit 2 of the outer circuit is mapped to qubit 4 of the inner circuit, qubits 3 to 5 of the outer circuit are mapped to qubits 1 to 3 of the inner circuit, and qubit 6 of the outer circuit is mapped to qubit 5 of the inner circuit.

Click the second MCX gate in the plot. A new figure showing the internal gates of the composite gate appears.

## Input Arguments

`controlQubits`

— Control qubits of MCX gate

positive integer scalar | positive integer vector

Control qubits of the MCX gate, specified as a positive integer scalar index or vector of qubit indices.

`targetQubit`

— Target qubit of MCX gate

positive integer scalar

Target qubit of the MCX gate, specified as a positive integer scalar index.

`ancillaQubits`

— Ancilla qubits of MCX gate

positive integer scalar | positive integer vector

Ancilla qubits of the MCX gate, specified as a positive integer scalar index or vector of qubit indices.

The number of ancilla qubits (or `length(ancillaQubits)`

)
determines the implementation of the internal gates to construct the returned
`CompositeGate`

object for the MCX gate, but it does not affect the
MCX gate operation on the target qubit.

If the number of ancilla qubits is 1 (recommended), then the implementation requires a linear number of internal gates with respect to the number of control qubits.

If the number of ancilla qubits is

*k*–2, where*k*is the number of control qubits, then the implementation requires the minimal number of internal gates among these options. The number of internal gates still grows linearly with respect to the number of control qubits, but at a smaller factor compared to the option with one ancilla qubit.If the number of ancilla qubits is 0, then the implementation requires an exponential number of internal gates with respect to the number of control qubits.

All implementations assume the ancilla qubits are in an arbitrary state, and the MCX gate returns the ancilla qubits in the same state that they started in.

## Output Arguments

`cg`

— MCX gate

`CompositeGate`

object | `SimpleGate`

object

MCX gate, returned as a `CompositeGate`

object or a
`SimpleGate`

object.

If the number of control qubits is greater than 2 (

`length(controlQubits)>2`

), then the`mcxGate`

function returns`cg`

as a`CompositeGate`

object that consists of several internal gates.If the number of control qubits is less than or equal to 2 (

`length(controlQubits)<=2`

), then the`mcxGate`

function returns`cg`

as a`SimpleGate`

object. If there are no control qubits, then the function returns`cg`

as the X gate (`xGate`

). If there is one control qubit, then the function returns`cg`

as the controlled X or CNOT gate (`cxGate`

). If there are two control qubits, then the function returns`cg`

as the CCNOT gate (`ccxGate`

).

## References

[1] Barenco, Adriano, et al.
“Elementary Gates for Quantum Computation.” *Physical Review A* 52, no. 5
(November 1, 1995): 3457–67. https://doi.org/10.1103/PhysRevA.52.3457.

## Version History

**Introduced in R2023a**

## Comando de MATLAB

Ha hecho clic en un enlace que corresponde a este comando de MATLAB:

Ejecute el comando introduciéndolo en la ventana de comandos de MATLAB. Los navegadores web no admiten comandos de MATLAB.

Select a Web Site

Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .

You can also select a web site from the following list:

## How to Get Best Site Performance

Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.

### Americas

- América Latina (Español)
- Canada (English)
- United States (English)

### Europe

- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)

- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)