# radareqrng

## Description

## Examples

### Estimate Maximum Detectable Range

Estimate the theoretical maximum detectable range for a monostatic radar operating at 10 GHz using a pulse duration of 10 μs. Assume the output SNR of the receiver is 6 dB.

```
lambda = physconst('LightSpeed')/10e9;
SNR = 6;
tau = 10e-6;
Pt = 1e6;
maxrng = radareqrng(lambda,SNR,Pt,tau)
```

maxrng = 4.1057e+04

### Estimate Maximum Detectable Range With Target RCS

Estimate the theoretical maximum detectable range for a monostatic radar operating at 10 GHz using a pulse duration of 10 μs. The target RCS is 0.1 m². Assume the output SNR of the receiver is 6 dB. The transmitter-receiver gain is 40 dB. Assume a loss factor of 3 dB.

lambda = physconst('LightSpeed')/10e9; SNR = 6; tau = 10e-6; Pt = 1e6; RCS = 0.1; Gain = 40; Loss = 3; maxrng2 = radareqrng(lambda,SNR,Pt,tau,'Gain',Gain, ... 'RCS',RCS,'Loss',Loss)

maxrng2 = 1.9426e+05

## Input Arguments

`lambda`

— Wavelength of radar operating frequency

positive scalar

Wavelength of radar operating frequency, specified as a positive scalar. The wavelength is the ratio of the wave propagation speed to frequency. Units are in meters. For electromagnetic waves, the speed of propagation is the speed of light. Denoting the speed of light by *c* and the frequency (in hertz) of the wave by *f*, the equation for wavelength is:

$$\lambda =\frac{c}{f}$$

**Data Types: **`double`

`SNR`

— Input signal-to-noise ratio at receiver

scalar | length-*J* real-valued vector

Input signal-to-noise ratio (SNR) at the receiver, specified as a scalar or
length-*J* real-valued vector. *J* is the number
of targets. Units are in dB.

**Data Types: **`double`

`Pt`

— Transmitted peak power

positive scalar

Transmitter peak power, specified as a positive scalar. Units are in watts.

**Data Types: **`double`

`tau`

— Single pulse duration

positive scalar

Single pulse duration, specified as a positive scalar. Units are in seconds.

**Data Types: **`double`

### Name-Value Arguments

Specify optional pairs of arguments as
`Name1=Value1,...,NameN=ValueN`

, where `Name`

is
the argument name and `Value`

is the corresponding value.
Name-value arguments must appear after other arguments, but the order of the
pairs does not matter.

*
Before R2021a, use commas to separate each name and value, and enclose*
`Name`

*in quotes.*

**Example: **`SNR,10`

`RCS`

— Radar cross section

`1`

(default) | positive scalar | length-*J* vector of positive values

Radar cross section specified as a positive scalar or length-*J* vector of
positive values. *J* is the number of targets. The target RCS is
nonfluctuating (Swerling case 0). Units are in square meters.

**Data Types: **`double`

`Ts`

— System noise temperature

`290`

(default) | positive scalar

System noise temperature, specified as a positive scalar. The system noise temperature is the product of the system temperature and the noise figure. Units are in Kelvin.

**Data Types: **`double`

`Gain`

— Transmitter and receiver gains

`20`

(default) | scalar | real-valued 1-by-2 row vector

Transmitter and receiver gains, specified as a scalar or real-valued 1-by-2 row vector. When
the transmitter and receiver are co-located (monostatic radar),
`Gain`

is a real-valued scalar. Then, the transmit and receive
gains are equal. When the transmitter and receiver are not co-located (bistatic radar),
`Gain`

is a 1-by-2 row vector with real-valued elements. If
`Gain`

is a two-element row vector it has the form
`[TxGain RxGain]`

representing the transmit antenna and receive
antenna gains. Units are in dB.

**Example: **`[15,10]`

**Data Types: **`double`

`Loss`

— System losses

`0`

(default) | scalar | length-*J* real-valued vector

System losses, specified as a scalar. Units are in dB.

**Example: **`1`

**Data Types: **`double`

`CustomFactor`

— Custom factor

0 (default) | scalar | length-*J* column vector of real values

Custom loss factors specified as a scalar or length-*J* column vector of real
values. *J* is the number of targets. These
factors contribute to the reduction of the received signal
energy and can include range-dependent Sensitive Time Control
(STC), eclipsing, and beam-dwell factors. Units are in
dB.

**Example: **`[10,20]`

**Data Types: **`double`

`unitstr`

— Units of the estimated maximum theoretical range

`'m'`

(default) | `'km'`

`'mi'`

`'nmi'`

Units of the estimated maximum theoretical range, specified as one of:

`'m'`

meters`'km'`

kilometers`'mi'`

miles`'nmi'`

nautical miles (U.S.)

## Output Arguments

`maxrng`

— Estimated theoretical maximum detectable range

positive scalar

The estimated theoretical maximum detectable range, returned as a positive scalar.
The units of `maxrng`

are specified by `unitstr`

.
For bistatic radars, `maxrng`

is the geometric mean of the range from
the transmitter to the target and the receiver to the target.

## More About

### Point Target Radar Range Equation

The point target radar range equation estimates the power at the input to the receiver for a target of a given radar cross section at a specified range. The model is deterministic and assumes isotropic radiators. The equation for the power at the input to the receiver is

$${P}_{r}=\frac{{P}_{t}{G}_{t}{G}_{r}{\lambda}^{2}\sigma}{{(4\pi )}^{3}{R}_{t}^{2}{R}_{r}^{2}L},$$

where the terms in the equation are:

*P*— Peak transmit power in watts_{t}*G*— Transmit antenna gain_{t}*G*— Receive antenna gain. If the radar is monostatic, the transmit and receive antenna gains are identical._{r}*λ*— Radar wavelength in meters*σ*— Target's nonfluctuating radar cross section in square meters*L*— General loss factor in decibels that accounts for both system and propagation loss*R*— Range from the transmitter to the target_{t}*R*— Range from the receiver to the target. If the radar is monostatic, the transmitter and receiver ranges are identical._{r}

Terms expressed in decibels, such as the loss and gain factors, enter the equation in the form 10^{x/10} where *x* denotes the variable. For example, the default loss factor of 0 dB results in a loss term of 10^{0/10}=1.

### Receiver Output Noise Power

The equation for the power at the input to the receiver represents the
*signal* term in the
signal-to-noise ratio. To model the noise term, assume the
thermal noise in the receiver has a white noise power spectral
density (PSD) given by:

$$P(f)=kT,$$

where *k* is the Boltzmann
constant and *T* is the effective noise
temperature. The receiver acts as a filter to shape the white
noise PSD. Assume that the magnitude squared receiver frequency
response approximates a rectangular filter with bandwidth equal
to the reciprocal of the pulse duration, *1/τ*.
The total noise power at the output of the receiver is:

$$N=\frac{kT{F}_{n}}{\tau},$$

where *F _{n}
* is the receiver

*noise factor*.

The product of the effective noise temperature and the receiver noise factor is referred to as the *system temperature*. This value is denoted by *T _{s}*, so that T

_{s}=

*TF*.

_{n}### Receiver Output SNR

Define the output SNR. The receiver output SNR is:

$$\frac{{P}_{r}}{N}=\frac{{P}_{t}\tau \text{}\text{\hspace{0.05em}}{G}_{t}{G}_{r}{\lambda}^{2}\sigma}{{(4\pi )}^{3}k{T}_{s}{R}_{t}^{2}{R}_{r}^{2}L}.$$

You can derive this expression using the following equations:

Received signal power in Point Target Radar Range Equation

Output noise power in Receiver Output Noise Power

### Theoretical Maximum Detectable Range

Compute the maximum detectable range of a target.

For monostatic radars, the range from the target to the transmitter and receiver is identical. Denoting this range by *R*, you can express this relationship as $${R}^{4}={R}_{t}^{2}{R}_{r}^{2}$$.

Solving for *R*

$$R={(\frac{N{P}_{t}\tau {G}_{t}{G}_{r}{\lambda}^{2}\sigma}{{P}_{r}{(4\pi )}^{3}k{T}_{s}L})}^{1/4}$$

For bistatic radars, the theoretical maximum detectable range is the geometric mean of the ranges from the target to the transmitter and receiver:

$$\sqrt{{R}_{t}{R}_{r}}={(\frac{N{P}_{t}\tau {G}_{t}{G}_{r}{\lambda}^{2}\sigma}{{P}_{r}{(4\pi )}^{3}k{T}_{s}L})}^{1/4}$$

## References

[1] Richards, M. A.
*Fundamentals of Radar Signal Processing*. New York: McGraw-Hill,
2005.

[2] Skolnik, M.
*Introduction to Radar Systems*. New York: McGraw-Hill,
1980.

[3] Willis, N. J. *Bistatic
Radar*. Raleigh, NC: SciTech Publishing, 2005.

## Extended Capabilities

### C/C++ Code Generation

Generate C and C++ code using MATLAB® Coder™.

Usage notes and limitations:

Does not support variable-size inputs.

## Version History

**Introduced in R2021a**

## Comando de MATLAB

Ha hecho clic en un enlace que corresponde a este comando de MATLAB:

Ejecute el comando introduciéndolo en la ventana de comandos de MATLAB. Los navegadores web no admiten comandos de MATLAB.

Select a Web Site

Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .

You can also select a web site from the following list:

## How to Get Best Site Performance

Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.

### Americas

- América Latina (Español)
- Canada (English)
- United States (English)

### Europe

- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)

- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)