This is machine translation

Translated by Microsoft
Mouseover text to see original. Click the button below to return to the English version of the page.

Note: This page has been translated by MathWorks. Click here to see
To view all translated materials including this page, select Country from the country navigator on the bottom of this page.

View Simulation Results

Connect signals to a scope or scope viewer to prototype, validate, and debug your Simulink® model

Scope blocks and scope viewers offer a quick way to visualize simulation data over time. If you are prototyping a model, connect signals to a Scope block, simulate the model, and then view the results in a scope window. Use the results to validate your design. If you need to debug your model, use oscilloscope-like tools (triggers and cursor measurements) available with a scope to locate the problem. To learn more, see Prototype and Debug Models with Scopes.


ScopeDisplay signals generated during simulation
Scope Viewer and Floating ScopeDisplay signals generated during simulation without signal lines
XY GraphDisplay X-Y plot of signals using MATLAB figure window


Scope ConfigurationControl Scope block appearance and behavior


Common Scope Block Tasks

Step-by-step procedures of common scope tasks, including logging data, sharing scope images, and display manipulation

Floating Scope and Scope Viewer Tasks

Step-by-step procedures for frequently carried out Floating Scope block and Scope viewer tasks

Control Scope Blocks Programmatically

Control scopes with programming scripts.

Decide How to Visualize Simulation Data

Explains how to display your output directories.

Scope Blocks and Scope Viewer Overview

Choices about how to display simulation results graphically

Prototype and Debug Models with Scopes

cursor measurement

Signal and Scope Manager

Describes the Signal and Scope Manager