Zynq workflow error in step 4.2

When I try to run foc demo on zynq, there has been an error in step 4.2.

I have tried MATLAB R2022a, R2021b, R2020b and R2019b, they all have this problem.

[zyx851]

### ++++++++++++++ Task Generate Software Interface ++++++++++++++

### Generating new Zynq Software Interface model: gm_focZynqHdl_interface

### No driver block was generated for port(s) "IP_ADC_A_Count" mapped to interface "IP_ADC_PhaseCurrentA" in the software interface model.

### No driver block was generated for port(s) "IP_ADC_B_Count" mapped to interface "IP_ADC_PhaseCurrentB" in the software interface model.

### No driver block was generated for port(s) "IP_Encoder_Index_Found" mapped to interface "IP_ENC_IndexFound" in the software interface model.

### No driver block was generated for port(s) "IP_Encoder_Count" mapped to interface "IP_ENC_Count" in the software interface model.

### No driver block was generated for port(s) "IP_Encoder_Count_Per_Revolution" mapped to interface "IP_ENC_Count_Per_Revolution" in the software interface model.

### No driver block was generated for port(s) "IP_Encoder_A_Leads_B" mapped to interface "IP_ENC_A_Leads_B" in the software interface model.

### No driver block was generated for port(s) "IP_Inverter_Enable" mapped to interface "IP_PWM_Enable" in the software interface model.

### No driver block was generated for port(s) "IP_PWM_Counter_Max" mapped to interface "IP_PWM_CounterMax" in the software interface model.

### No driver block was generated for port(s) "IP_PWM_A_Compare" mapped to interface "IP_PWM_CompareA" in the software interface model.

### No driver block was generated for port(s) "IP_PWM_B_Compare" mapped to interface "IP_PWM_CompareB" in the software interface model.

### No driver block was generated for port(s) "IP_PWM_C_Compare" mapped to interface "IP_PWM_CompareC" in the software interface model.

### No driver block was generated for port(s) "IP_PWM_Dead_Time_Count" mapped to interface "IP_PWM_DeadTimeCount" in the software interface model.

Executing custom callback plugin_gm_config for model focZynqHdl.

Dot indexing is not supported for variables of this type.

Error in zynqMotcon2.referenceDesignVivado.plugin_gm_config (line 156)

delete(topLevelLines.Inport);

Error in hdlturnkey.backend.ModelGeneration/customGMConfig

Error in hdlturnkey.backend.ModelGenerationECoder/configureTIFDUT

Error in hdlturnkey.backend.ModelGenerationECoder/generateModelWithoutLibraryBlock

Error in hdlturnkey.backend.ModelGeneration/generateModel

Error in hdlturnkey.TurnkeyDriver/generateInterfaceModel

Error in hdlturnkey.ip.IPDriver/runSWInterfaceGen

Error in downstream.DownstreamIntegrationDriver/runSWInterfaceGen

Error in hwcli.runWorkflow

Error in hdlcoder.runWorkflow (line 27)

hwcli.runWorkflow( varargin{:} );

Error in task.t5_generateBitstreamAndInterfaceBlock (line 177)

hdlcoder.runWorkflow('focZynqHdl', hWC);

Answer 1

[Kiran Kintali]

This is an unepxected error issue. Please contact tech support for a solution and the next steps.