ip core generation stuck at hdl code generation step
4 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
Prashanthi Pathipati
el 15 de Mayo de 2023
Editada: Prashanthi Pathipati
el 31 de Jul. de 2023
i have to convert function to ip using hdl coder but while converting it stuck at HDL code generation
1.the ouput Q port has 12*12 matrix, so in HDL code genetaion i have enabled frame to sample conversion
still am facing issues but i opted Generic ASIC/FPGA it generated a .v (verilog) file
could please help me out where am going wrong or do i have enable any other things
0 comentarios
Respuestas (1)
Kiran Kintali
el 15 de Mayo de 2023
Would you be able to share the MATLAB Code and the Project file?
Please reach out to tech support for help.
11 comentarios
Angela Cuadros Castiblanco
el 31 de Mayo de 2023
Hello Prashanthi,
In general, matrix ports at the DUT interface are not supported in the IP core generation workflow unless Frame to Sample conversion is enabled. However, generating an IP core using frame to sample conversion is not supported for the MATLAB to HDL workflow as specified in the limitations listed in:
If you have access to Simulink, you can try generating an IP core from a Simulink model with a MATLAB function block, for an example see:
Alternatively, you can manually serialize the output of your design and map the scalar ports of the streaming output to AXI4-Stream interfaces and generate an IP core. For an example see:
mlhdlc_demo_setup('heq')
Hope that helps!
Ver también
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!