Device arm_dap_0 is not programmable with FPGA in the loop tutorial.

Hello all, i'm following the FPGA in the loop tutorial and i'm stuck with the following error: Device arm_dap_0 is not programmable.

I created a custom board file using the specs given by digilent. I have an Arty Z7020.

I'm working on Ubuntu 18.04.05 LTS and using a micro-USB cable connected to the progUART port of my board. The blue jumper (don't know if that is the name) is connected in JTAG configuration.

I have already downloaded the VHDL verifier, and generation for Xillinx add ons. And currently run the Vivado WebPAck with Vitis on a student license.

Thanks in advance!

[Walter Bomela]

The FPGA part is at JTAG Chain Position 2.

Answer 1

[Aman Vyas]

Hi,

Arty_Z7020 is the member of zynq family and this feature is not supported for HDL_verifier workflow as of now.

You can use other such configurations which supports as of now.

Pre release can be seen here which will be added in later features:

Release Notes for HDL Verifier - MATLAB & Simulink (mathworks.com)

Hope it helps !

[Eduardo Flores]

Hello Aman, in the HDL_verifier web page says it does support Zynq 7000 boards https://es.mathworks.com/hardware-support/xilinx-fpga-board.html?s_tid=srchtitle

• Virtex-7, Kintex-7, Artix®-7, Zynq-7000

Also, what do you mean by "use other such configurations". Get another FPGA like the Virtex?

Answer 2

[Ahmad Reda]

I am trying to deploy DNN model on ZedBorad and I am getting the same error.

[Eduardo Flores]

That's odd. I changed to a Zedboard and the problem dissappeared.