Mohamad Nazir

Last seen: alrededor de 1 año hace | Con actividad desde 2021

Followers: 0 Following: 0

Estadística

All

Feeds

Pregunta

Connection to target microcontroller error
Hi, I designed an interrupt-based model for object code generation to the target microcontroller including blocks from the targ...

alrededor de 2 años hace | 1 respuesta | 0

1

respuesta

Respondida
Turning voltage on/off in a PV Array and DC motor simulation
What do you mean exactly the controlled voltage source does not work? Did you take into consideration that the load torque will ...

alrededor de 2 años hace | 0

Respondida
how to calculate Zero Sequence inductance(L0)For IPMSM delta connection
The zero sequence inductance can be calculated using L0 = V0open/I0short where V0open is the open-circuit voltage for the zer...

más de 2 años hace | 0

| aceptada

Respondida
How to calculate accurate Sample time for PWM generator block & Current Controller (Here I am using Torque Controller with FOC Controller & 3 Phase IPMSM)
The general rule is Nyquist's theorem which is a sampling frequency at least 10x the frequency of the signal you are trying to s...

más de 2 años hace | 0

| aceptada

Respondida
in My model I am using torque controller with FOC for IPMSM. How to tune Current Controller PID .Because Current controller have two PID controller.
You can follow the steps of the following example in the link below to tune the current controllers at first and then repeat it ...

más de 2 años hace | 0

Respondida
What is an efficient way to do PID tuning in a model with long computing time?
You can identify a second order transfer function model of your VFD from the open-loop step response (using overshoot, response ...

más de 2 años hace | 1

Respondida
What is the wL block circled in blue called in MATLAB?
Hi, isn't this the velocity multiplied by the inductance? this can be implemented by simply using the product block (https://fr....

casi 3 años hace | 0

Respondida
How can I make a simscape representation of the simulink 'Universal Bridge'
Hi, I think the closest block to the Universal Bridge in the electrical library is https://fr.mathworks.com/help/sps/ref/convert...

casi 3 años hace | 0

Respondida
Transfer function matrix of a Multiple input DC-DC converter
Hi Mohammad, you can probably use Model Linearizer app (https://fr.mathworks.com/help/slcontrol/ug/modellinearizer-app.html) on ...

casi 3 años hace | 0

Respondida
Help required for creating a current sink
Hi, depending on which library you are using, you can use one of the blocks below to model a variable resistor such that the cur...

casi 3 años hace | 0

| aceptada

Respondida
Controling multiple switches in a multiple input DC-DC converter
Hi Mohamad, to my understanding you need to have a charging/discharging case which can be simply modelled with a manual switch w...

casi 3 años hace | 0

Respondida
Explaining the function of certain blocks
When a DC motor is supplied with a fixed value DC voltage, it runs at a constant speed (assuming constant load). To control its ...

casi 3 años hace | 1

| aceptada

Respondida
How to converge 3 phases of simulink voltage onto a simscape VI measurement which accepts 1 port
All you have to do is right click on the current & voltage sensor, choose Simscape > Modeling option > expanded three-phase port...

casi 3 años hace | 0

Respondida
Which block to use for BLDC motor for BLDC speed controller design?
BLDC normally denotes a permanent magnet synchronous machine with trapezoidal back-emf waveform. When the machine is called simp...

casi 3 años hace | 0

| aceptada

Respondida
How can I implement computation step in simulink?
Hi, Depends on what you are trying to achieve. If you want to implement it in Laplace form, for the first block your a is = T...

más de 4 años hace | 1

Respondida
Error in PWM Generator Vienna Rectifier
Have you tried to simply insert a "round" block or a "data type conversion" block (or maybe both) for "SmallJexNum" in the "PWM ...

más de 4 años hace | 0