Community Profile

photo

Martin Enderwitz

Last seen: Today Con actividad desde 2015

Estadísticas

All
  • Knowledgeable Level 2
  • First Answer
  • Solver

Ver insignias

Content Feed

Ver por

Respondida
Garbage Data received for USRP X310 using Loopback Test (Wireless Testbench)
Hi Uzair, I've tried your script on our own X310 setup and was unable to reproduce the noisy spectrum you've shown. The signal ...

más de 1 año hace | 0

Respondida
Change RF parameters from matlab using libiio on adrv9361z7035
The Communications Toolbox Support Package for Xilinx Zynq-Based Radio is based on the reference design provided by Analog Devic...

más de 2 años hace | 0

| aceptada

Respondida
How to configure Vivado 2018.2 System Generator for R2019a
Xilinx System Generator for DSP is not used as part of the standard workflow for the example, HW/SW Co-Design with AXI4-Stream U...

alrededor de 3 años hace | 0

Respondida
Frame Size Modification of Zynq AD9361's QPSK models
For the transmitter, the frame size is controlled by the dimensions of the data sent to the data input port on the block. For t...

alrededor de 3 años hace | 1

Respondida
Failed to find device: cf-ad9361-lpc.
Hi, There are a few things to consider to resolve the issues you are seeing: The example you are working with demonstrates HW/...

más de 3 años hace | 0

| aceptada

Respondida
Can the USRP Radio Support Package be used to run programs on the Ettus or do you need to transform code into VHDL in a program like HDL Coder?
Hi Tyler, At present, there are two support packages available for use with Ettus USRP devices. Communications Toolbox™ Suppor...

casi 5 años hace | 1

| aceptada

Respondida
The USB interface of PZSDRCC-BRK-G carrier board doesn't work with the Matlab/Xilinx firmware
Hi Ethan, Sorry, I misunderstood your original question. At present, the MathWorks firmware does not currently support thi...

alrededor de 6 años hace | 0

Respondida
The USB interface of PZSDRCC-BRK-G carrier board doesn't work with the Matlab/Xilinx firmware
Hi Ethan, If I understand correctly, you're trying to use the USB-OTG to port on the carrier to provide the connection betw...

alrededor de 6 años hace | 0

Respondida
I cannot find Communications System Toolbox™ Support Package for Analog Devices® ADALM-Pluto Radio,
Hi Victor, The Support Package for Analog Devices® ADALM-Pluto Radio was released with R2017a and requires MATLAB R2017a as t...

casi 7 años hace | 0

Resuelto


Times 2 - START HERE
Try out this test problem first. Given the variable x as your input, multiply it by two and put the result in y. Examples:...

más de 8 años hace