Issue Connecting to Xilinx FPGA Board for Simulation

20 visualizaciones (últimos 30 días)
Max
Max el 7 de Feb. de 2023
Comentada: YP el 18 de Feb. de 2024
I was trying to connect to my Xilinx FPGA board using MATLAB to run an FPGA-in-the-loop simulation, and I keep getting an error message. This error occurs in the validation step while using the "FPGA Board Manager" tool. It seems like there is some sort of compatability issue with the FPGA connection, but I'm not sure what.
Here are the screenshots:
Here's the text of the error Message:
To stop the test, press "Ctrl+C" in the MATLAB console window.
Starting FPGA-in-the-Loop test ...
Generating FPGA programming file ...Passed
Programming FPGA ...Passed
Running FIL simulation ...Failed
Error:Did not receive version information from the hardware. You must have a valid connection, a compatible development board, and compatible versions of the block and FPGA programming file.
I've tried looking at all the other MATLAB forum posts for this issue, and I didn't see any solutions. I've also tried different values for the JTAG clock frequency, but that also didn't work. :(
Any help would be greatly appreciated!
Version Information: Ubuntu 22.04 LTS, Vivado 2022.2, Matlab R2022b
  1 comentario
Ken
Ken el 28 de Ag. de 2023
Hello, I use the development board is also ZYNQ7020, has generated the bit stream file, running matlab, there are the following problems, do you have such a problem? Did not receive version information from the hardware. You must have a valid connection, a compatible development board, and compatible versions of the block and FPGA programming file.

Iniciar sesión para comentar.

Respuesta aceptada

YP
YP el 8 de Feb. de 2023
I am unable to find the manual for this board online. I can double check your pin setting if you can direct me to any doc/manual.
I noticed that the reset pin is 'active-low'. Is that correct? If you are not sure about the polarity, can you remove the definition about reset pin as it is optional?
  7 comentarios
YP
YP el 14 de Feb. de 2023
Good new.
This fix is will applied to MATLAB R2023b.
壹 王
壹 王 el 2 de Jun. de 2023
Thank you Very Much !

Iniciar sesión para comentar.

Más respuestas (2)

YP
YP el 8 de Feb. de 2023
Have you installed adept2?
https://www.mathworks.com/help/supportpkg/xilinxfpgaboards/ug/InstallDigilentAdept2Runtime.html
  1 comentario
Max
Max el 8 de Feb. de 2023
Yes, I've installed the digilent software and checked that the cable works by programming the FPGA using vivado.

Iniciar sesión para comentar.


Lucky
Lucky el 17 de Feb. de 2024
Hi All,
I am Facing the Same problem Can anyone Help me I have tried the Solution which has been Posted Here,
I am using Basys3 Xilinx FPGA Board and Having the same problem
  1 comentario
YP
YP el 18 de Feb. de 2024
@Lucky This question has been answered.
Please create a new one with more detail or contact Technical Support as your board is different from OP's board.

Iniciar sesión para comentar.

Productos


Versión

R2022b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by