Respondida
i need a model of synchronous machines with dampers windinf
Simscape Electrical offers synchronous machine models with both damper windings and without. For synchronous machines with damp...

más de 2 años hace | 0

Respondida
Automatic Transfer Switch Model
Simscape and Simscape Electrical provide the option to model a transfer switch. The easiest way is to use a circuit breaker (sin...

casi 3 años hace | 0

Respondida
What can I learn from Mathway's "Three-Phase Systems and Machines"?
This page aims to show how to simulate a three-phase power system containing electrical machines and other three-phase models. ...

casi 3 años hace | 0

Respondida
DC Microgrid modeling and control
Simscape Electrical is provinding many examples in the microdgrid area that can be used as a starting point. Check for example: ...

casi 3 años hace | 0

Respondida
Matlab simulink file shows following error Simulink does not have enough information to determine output sizes for this block. If you think the errors below are inaccurate, try specifying types for the block inputs and/or sizes for the block outputs.
Taking a quick look there are two changes that are needed to make this model run: 1) Line 38 in the MATLAB function should be (...

casi 3 años hace | 0

Respondida
Error with running a Simulink model.
Without the files is not easy to tell where the problem is. I suspect when you run the first model some parameters from the work...

casi 3 años hace | 0

Respondida
Direct matrix converter with svm control
A good starting point is Simscape Electrical. You can check this example: https://www.mathworks.com/help/sps/ug/three-phase-mat...

casi 3 años hace | 0

Respondida
How we modeling PWM inverter with PI and PR current controllers with grid connection
There is not such thing as the best controller. It all depends on specific requirements. For a starting point with grid connecte...

casi 3 años hace | 0

Respondida
vector control of of WRSM ( wound rotor synchronous motor
From the diagram is difficult to spot the issue as everything is in a subsystem. I assume there is a sign mismatch somewhere. Fo...

casi 3 años hace | 0

Respondida
Design and Simulation of DC to AC Power Inverter with Star Connected Load
It is not exaty clear what you are trying to achieve and what have you tried already. A Motor drive can act as a DC-AC system an...

casi 3 años hace | 0

Respondida
Switch block in simulink does not connect
I suspect the blocks you are trying to connect are from two different technologies. Without a model is imposible to point to any...

casi 3 años hace | 0

Respondida
Permanent Magnet Synchronous Machine - meaning of Mechanical System parameters
The combined viscous friction coefficient in a motor model is a parameter that describes the effect of friction on the motor's p...

casi 3 años hace | 0

Respondida
I want to build the simulink model for PMSM motor, which takes input from PWM high speed block of micro chip motor library.
From what can be seen in the diagram there is a 'dq-to-alphabeta' block which outputs two signals connected to the SVM generator...

casi 3 años hace | 0

Respondida
How to apply H-inf control to a PMSM motor?
For PMSM control the dq rotor reference frame can be used. The state-space model in the dq reference frame is known and availabl...

casi 3 años hace | 0

Respondida
Connect a H8 inverter to a surface PMSM
It is possible to use volatage measurement and then feed the measured voltage to the Simulink block.

casi 3 años hace | 0

Respondida
Linking physical domain to mathematical model
If the model is implemented in Simulink then you can use a PS-Simulink Converter to obtain the voltage as a Simulink signal whic...

casi 3 años hace | 0

Respondida
Connection of Inductance between the inverter output and Input PMSM in MATLAB/Simulink
It is not possible to connect 2 current sources in series. In specialized power systems inductive elements are modeled as curren...

casi 3 años hace | 0

Respondida
Field-oriented PMSM control, Motor constant at 50rpm no matter the input
First, the off-state conductance in the Converter (Three-Phase) block is too big. I would use something like 1e-4 to start with....

casi 3 años hace | 0

Respondida
Why can't I find the 'electrical' project in the Simscape library in Simulink in my MATLAB 2023b version？
From what I see in the picture, Simscape Electrical is not installed. Check that Simscape Electrical is indeed not installed and...

casi 3 años hace | 0

Respondida
Can we use control system toolbox apps on simscape components
A good starting point is the Tune Field-Oriented Controllers for a PMSM Using Closed-Loop PID Autotuner Block example in Simulin...

casi 3 años hace | 0

Respondida
want help to modify one of matlab examples
This example is using variant subsystem. if you look inside the Electric Motor subsystem you can see different variants for vari...

casi 3 años hace | 0

| aceptada

Respondida
How could we connect a 4 IGBT block to a DC voltage source?
It is not working because you are trying to connect blocks from two different technologies, Simscape and Specialized Power Syste...

casi 3 años hace | 0

Respondida
Average-Value DC-DC Converter block
The Averaged-Value DC-DC Converter is unidirectional, converting DC power from left input to right output. The control input can...

casi 3 años hace | 0

Respondida
how to set SOC Estimator (Adaptive Kalman Filter) block.
The SOC Estimator (Kalman Filter) is assuming an equivalent battery model with charge dynamics. The polarization voltage is an i...

casi 3 años hace | 0

Respondida
How to 'freeze' or 'lock' PLL phase angle using discrete PLL block in MATLAB/Simulink?
If the plan is to hold the PLL output for a while probably best to use a triggered subsystem: https://www.mathworks.com/help/si...

casi 3 años hace | 0

Respondida
Can you tell me what is the difference between detailed and average model of PV in matlab simulink ?
The main difference between the detailed model and the average model is in the way that DC-DC boost converter and three-phase VS...

casi 3 años hace | 0

Respondida
Problems modeling a battery behaviour to generate C Code.
It is possible to generate C code from the Simscape model directly: https://www.mathworks.com/help/simscape/ug/about-code-gener...

casi 3 años hace | 0

Respondida
is there any generator block to convert mechanical to electrical energy
All electric machines in Simscape Electrical can be used as generators. Check this example of a Synchronous Machine Round Roto...

casi 3 años hace | 0

Respondida
in simulink how to connect an electrical network output as an input of any simulink block and output of a simulink block to the input of electrical network??is there any converter in b/w them??
Simulink can take measurements from the electrical networks using sensors or a Probe block. It is possible to send Simulink sign...

casi 3 años hace | 0

Respondida
How can I do feedback torque control of a permanent magnet synchronous motor (PMSM)?
The folowing example is doing PMSM torque control: https://www.mathworks.com/help/sps/ug/ipmsm-torque-control.html An example ...

casi 3 años hace | 1

| aceptada