Digital Predistortion for Power-Amplifiers

Create a digital pre-distortion model with MATLAB®, including fitting model parameters to measured data in a single line of code and testing the results.

Published: 29 Jan 2012

Related Products

Feedback

Up Next:

Digital Mock-Up (DMU) is a widely used technology to virtually investigate geometrical and mechanical product properties. Functional Digital Mock-Up (FDMU) is a combination of traditional DMU with behavioral simulation in mechatronics. Enhanced with

MATLAB and Simulink as Building Blocks for Functional...

Related Videos:

In this webinar, you will learn about the use of Simulink in digital communications systems through numerous examples. In digital communications systems, the demodulator requires carrier phase synchronization and symbol timing synchronization to achi

Simulink and Digital Communications - A Perfect Match for...

Create a plant model that simulates the mechanics and electronics of a robotic assembly.

Accuracy, Speed, and Power Consumption | Mechatronics with...

In this webinar we demonstrate how to develop aircraft electrical networks using Model-Based Design.  Abstract and detailed models of the components in the network are used to enable both rapid iteration and detailed analysis. This webinar includes d

Aircraft Power Network Development with Model-Based Design

AUTOSAR is an emerging trend in the industry. As such, pilot programs for AUTOSAR must be executed alongside other production programs. Often, a model must be maintained for both AUTOSAR and non-AUTOSAR during the transition phase. This presentation

Practical Approaches for Re-architecture for AUTOSAR or...

View more related videos