From the series: Microgrid System Development and Analysis
Jonathan LeSage, MathWorks
In this third video on microgrids, the modeling and simulation of power systems in MATLAB® and Simulink® is introduced with Simscape Electrical™. See how Simscape Electrical can be used to schematically represent a one-line microgrid diagram using blocks that represent different distributed energy resources (DERs). The DERs in this example include renewables, such as solar, a diesel GenSet, and an energy storage system (ESS). Using the simple microgrid that is built
Since microgrid systems commonly have inverter-based controls for solar and ESS, different levels of simulation fidelity can be useful to study the microgrid operation. Simscape Electrical can be used to simulate Phasor or Electromagnetic Transients (EMT). Depending on the requirements of the simulation study, Phasor, EMT, or a combination of both can be used. An example of a segmented IEEE 123 node network is introduced that illustrates a hybrid Phasor-EMT simulation.
In addition to desktop simulation for analysis, you learn how the same desktop simulations can be transferred to a real-time platform for hardware-in-the-loop simulation. This example uses Simulink Real-Time™ and a Speedgoat real-time machine. The Simscape Electrical model is converted to a C-code representation and then compiled for use on the real-time operating system.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .Select web site
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.